PDA

View Full Version : KT7A RAID BIOS problem



VIKTOR2020
10-30-01, 08:37 AM
I changed my BIOS and can't figure out how to get it back the way it was (it worked better that way).
Standard CMOS Features
IDE Primary Master NONE
(This used to say ATAPI 50 CD ROM)
IDE Secondary Master NONE
(This used to say Plextor CD R)

When I press ENTER to modify IDE Primary or Secondary Master, the options are
None
Auto
Manual

I've tried Auto and Manual, but neither changes the result.

How is this affecting boot-up?
It takes my BIOS nearly five minutes to "Detect IDE Drives."!!!

CBurcik
10-30-01, 08:59 AM
I have always used Auto.......

Also make sure that the jumpers on each drive are set properly.
(master and slave)


Also if you made alot of BIOS changes you may want to load defaults to get things back to normal.