PDA

View Full Version : 2 nic cards VS. one nic while sharing cable on lan



binky
01-07-00, 04:19 PM
Can anyone tell me why exactly you need 2 nic cards installed in the proxy machine to share a cable connection over a lan? I am using only one, and it seems to work fine. I'm using Spoon Proxy 2.2 and BlackIce Defender on the proxy machine. I recently configured the one nic card to have 2 IP addys, but it seems superfluous. I read everywhere that you need 2 nic cards to do this but why? What is the advantage over having one card?
-Thanks

Brent
01-08-00, 12:09 AM
How can you do it with one?

You need 2 because one ethernet cable comes in from your Cable or DSL line providing the Internet to that Proxy or Internet Sharing Machine.

Then you need one NIC for an ethernet cable that goes from this Proxy machine to a HUB so you can share the Internet Connection with your LAN.

------------------
Brent a.k.a Borg Drone
Owner/Webmaster
The websites:
eXplosive3D up soon www.mngamers.com/explosive3d (http://www.mngamers.com/explosive3d)
Gamers Reality up soon www.gamersreality.com (http://www.gamersreality.com)

Out the 100TX, through the switch, down the cable modem, over the fiber optics, off the bridge, past the head end office....nothing but Net

Noir Pouvoir
01-14-00, 04:01 AM
I,ll bet if that config works collisions would kill performace....

Multihomed machining requires 2 nics ..
Nic#1 for external ip..(216.65.xxx.xxx)
Nic#2 internal ip,s for intranet(198.168.0.1)

To get proper performance without collisions
at your hub(yes you need a hub or switch)..
connect modem straight to nic#1 (isp)
connect hub to nic#2 and all others to the hub...easy

monty
01-30-00, 10:10 AM
The BEST explanation I've seen about the subject can be found here (http://www.timhiggins.com/ppd/twonic.htm).

------------------
http://members.home.net/montybass

PhoneTech
01-31-00, 11:43 PM
Oooh, Oooh, I know this. Use two because if you use one the info will collide at times. I was using one and couldn't log on to half-life in multiplayer. When I put the 2nd one in it worked like a charm. I'm using WinProxy 3.0.