PDA

View Full Version : Re: XP loses wireless connection when rebooting



=?Utf-8?B?QlNjaG9vbGVy?=
04-29-08, 09:43 PM
Pls. Help...i am having same issue as bobhpdx...i recently upgraded Lynksis
routers and now wireless connection disconnects on rebooting....BUT i have
not installed any software from the lynksis router in to the problem computer
(i have two computers and the problem-free computer has the software)...it
was working fine under the old linksys router...now, i tried going to the
startup menu, but not sure which one to unclick??? these are the
choices....any idea?

CLIStart
stsystra
ccApp
osCheck
jusched
WLTRAY
ctfmon
IPSecClient Icon
Microsoft Office

thanks.

--
bschooler


"bobhpdx" wrote:

>
>
> Thanks - that did it went to start, run, msconfig and turned off trendnet
> startup app - works every time now
>
> BobHpdx
>
> "Carl DaVault [MSFT]" wrote:
>
> > There's probably some utility (maybe from Trendnet?) that's disabling
> > Windows. You can check the task manager, startup group, services, etc. for
> > the application that's doing this.
> >
> > If this only happens on reboot, it's probably a service or something that
> > runs at startup.
> >
> > 3rd-party wireless apps usually leave an icon in the taskbar.
> >
> > Hope this helps!
> >
> > --
> > Standard Disclaimers -
> > This posting is provided "AS IS" with no warranties,
> > and confers no rights. Please do not send e-mail directly
> > to this alias. This alias is for newsgroup purposes only.
> >
> >
> > "peter" <pete121@telus.net.ca> wrote in message
> > news:zgutd.1551$6f6.173@edtnps89...
> > >I had this on my Dell Laptop until I went to administrative tool/ services
> > >and turned off wireless zero configuration.
> > > This way I used my Netgears configutation utility and now I connect each
> > > and every time.
> > > peter
> > > "bobhpdx" <bobhpdx@discussions.microsoft.com> wrote in message
> > > news:74795992-01A1-4089-9D30-C47CB99FCC6D@microsoft.com...
> > >>
> > >> We have several Dell XP machines with SP2
> > >>
> > >> We recently upgraded our Actiontec DSL gateway the 701 wireless model.
> > >> The
> > >> XP's connect quickly and easily with Trendnet 11Mbps 802.11b USB
> > >> adapters.
> > >>
> > >> However whenever you shut or reboot the Dell XP machine it loses the
> > >> checkmark in networking, properties Wireless Networking that instructs XP
> > >> to
> > >> " use windows to configure my wireless network settings"
> > >>
> > >> So when shutting down or rebooting you need to go back to this option and
> > >> instruct XP to use windows to configure the wireless network.
> > >>
> > >> While not critical, it is annoying and I was wondering if anyone knew if
> > >> this was a 'undocumented feature' or a bug. Or is there a setting that
> > >> cures
> > >> this that we have overlooked?
> > >>
> > >> Thanks for any help.
> > >>
> > >> BobH
> > >> Quik Internet of Portland
> > >
> > >
> >
> >
> >

Robert L. \(MS-MVP\)
04-30-08, 12:34 PM
Even you haven't install the wireless software, it could be other 3rd party
software. For troubleshooting, start the computer with clean boot.

Windows generalHow to run Windows OS with a clean boot · How to Run Windows
Safe Mode with Networking · How to setup DHCP for IP Phone How to sort
programs in Start ...
www.howtonetworking.com/Windows/windowsgeneral.htm


--
Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.HowToNetworking.com
"BSchooler" <BSchooler@discussions.microsoft.com> wrote in message
news:03F436FB-FE3C-4F5E-9C98-74D9DEAFE4D8@microsoft.com...
> Pls. Help...i am having same issue as bobhpdx...i recently upgraded
> Lynksis
> routers and now wireless connection disconnects on rebooting....BUT i have
> not installed any software from the lynksis router in to the problem
> computer
> (i have two computers and the problem-free computer has the software)...it
> was working fine under the old linksys router...now, i tried going to the
> startup menu, but not sure which one to unclick??? these are the
> choices....any idea?
>
> CLIStart
> stsystra
> ccApp
> osCheck
> jusched
> WLTRAY
> ctfmon
> IPSecClient Icon
> Microsoft Office
>
> thanks.
>
> --
> bschooler
>
>
> "bobhpdx" wrote:
>
>>
>>
>> Thanks - that did it went to start, run, msconfig and turned off trendnet
>> startup app - works every time now
>>
>> BobHpdx
>>
>> "Carl DaVault [MSFT]" wrote:
>>
>> > There's probably some utility (maybe from Trendnet?) that's disabling
>> > Windows. You can check the task manager, startup group, services, etc.
>> > for
>> > the application that's doing this.
>> >
>> > If this only happens on reboot, it's probably a service or something
>> > that
>> > runs at startup.
>> >
>> > 3rd-party wireless apps usually leave an icon in the taskbar.
>> >
>> > Hope this helps!
>> >
>> > --
>> > Standard Disclaimers -
>> > This posting is provided "AS IS" with no warranties,
>> > and confers no rights. Please do not send e-mail directly
>> > to this alias. This alias is for newsgroup purposes only.
>> >
>> >
>> > "peter" <pete121@telus.net.ca> wrote in message
>> > news:zgutd.1551$6f6.173@edtnps89...
>> > >I had this on my Dell Laptop until I went to administrative tool/
>> > >services
>> > >and turned off wireless zero configuration.
>> > > This way I used my Netgears configutation utility and now I connect
>> > > each
>> > > and every time.
>> > > peter
>> > > "bobhpdx" <bobhpdx@discussions.microsoft.com> wrote in message
>> > > news:74795992-01A1-4089-9D30-C47CB99FCC6D@microsoft.com...
>> > >>
>> > >> We have several Dell XP machines with SP2
>> > >>
>> > >> We recently upgraded our Actiontec DSL gateway the 701 wireless
>> > >> model.
>> > >> The
>> > >> XP's connect quickly and easily with Trendnet 11Mbps 802.11b USB
>> > >> adapters.
>> > >>
>> > >> However whenever you shut or reboot the Dell XP machine it loses the
>> > >> checkmark in networking, properties Wireless Networking that
>> > >> instructs XP
>> > >> to
>> > >> " use windows to configure my wireless network settings"
>> > >>
>> > >> So when shutting down or rebooting you need to go back to this
>> > >> option and
>> > >> instruct XP to use windows to configure the wireless network.
>> > >>
>> > >> While not critical, it is annoying and I was wondering if anyone
>> > >> knew if
>> > >> this was a 'undocumented feature' or a bug. Or is there a setting
>> > >> that
>> > >> cures
>> > >> this that we have overlooked?
>> > >>
>> > >> Thanks for any help.
>> > >>
>> > >> BobH
>> > >> Quik Internet of Portland
>> > >
>> > >
>> >
>> >
>> >

smlunatick
04-30-08, 02:40 PM
On Apr 29, 10:43*pm, BSchooler <BSchoo...@discussions.microsoft.com>
wrote:
> Pls. Help...i am having same issue as bobhpdx...i recently upgraded Lynksis
> routers and now wireless connection disconnects on rebooting....BUT i have
> not installed any software from the lynksis router in to the problem computer
> (i have two computers and the problem-free computer has the software)...it
> was working fine under the old linksys router...now, i tried going to the
> startup menu, but not sure which one to unclick??? *these are the
> choices....any idea?
>
> CLIStart
> stsystra
> ccApp
> osCheck
> jusched
>

A quic
> ctfmon
> IPSecClient Icon
> Microsoft Office
>
> thanks.
>
> --
> bschooler
>
>
>
> "bobhpdx" wrote:
>
> > Thanks - that did it went to start, run, msconfig and turned off trendnet
> > startup app - works every time now
>
> > BobHpdx
>
> > "Carl DaVault [MSFT]" wrote:
>
> > > There's probably some utility (maybe from Trendnet?) that's disabling
> > > Windows. You can check the task manager, startup group, services, etc.for
> > > the application that's doing this.
>
> > > If this only happens on reboot, it's probably a service or something that
> > > runs at startup.
>
> > > 3rd-party wireless apps usually leave an icon in the taskbar.
>
> > > Hope this helps!
>
> > > --
> > > Standard Disclaimers -
> > > This posting is provided "AS IS" with no warranties,
> > > and confers no rights. Please do not send e-mail directly
> > > to this alias. This alias is for newsgroup purposes only.
>
> > > "peter" <pete...@telus.net.ca> wrote in message
> > >news:zgutd.1551$6f6.173@edtnps89...
> > > >I had this on my Dell Laptop until I went to administrative tool/ services
> > > >and turned off wireless zero configuration.
> > > > This way I used my Netgears configutation utility and now I connect each
> > > > and every time.
> > > > peter
> > > > "bobhpdx" <bobh...@discussions.microsoft.com> wrote in message
> > > >news:74795992-01A1-4089-9D30-C47CB99FCC6D@microsoft.com...
>
> > > >> We have several Dell XP machines with SP2
>
> > > >> We recently upgraded our Actiontec DSL gateway the 701 wireless model.
> > > >> The
> > > >> XP's connect quickly and easily with Trendnet 11Mbps 802.11b USB
> > > >> adapters.
>
> > > >> However whenever you shut or reboot the Dell XP machine it loses the
> > > >> checkmark in networking, properties Wireless Networking that instructs XP
> > > >> to
> > > >> " use windows to configure my wireless network settings"
>
> > > >> So when shutting down or rebooting you need to go back to this option and
> > > >> instruct XP to use windows to configure the wireless network.
>
> > > >> While not critical, it is annoying and I was wondering if anyone knew if
> > > >> this was a 'undocumented feature' or a bug. *Or is there a setting that
> > > >> cures
> > > >> this that we have overlooked?
>
> > > >> Thanks for any help.
>
> > > >> BobH
> > > >> Quik Internet of Portland- Hide quoted text -
>
> - Show quoted text -

Linksys router software has nothing to do with the problem. You need
to check the problematic wireless adapter PC and disable the included
management tools / applications. Then, Wireless Zero Configuration
should be stable.

A quick search of the web, WLTRAY seems to be the Dell wireless
adapter management tools.

=?Utf-8?B?QlNjaG9vbGVy?=
05-03-08, 06:14 PM
your messages helped me with the diagnosis...thank you much. very helpful..
--
bschooler


"smlunatick" wrote:

> On Apr 29, 10:43 pm, BSchooler <BSchoo...@discussions.microsoft.com>
> wrote:
> > Pls. Help...i am having same issue as bobhpdx...i recently upgraded Lynksis
> > routers and now wireless connection disconnects on rebooting....BUT i have
> > not installed any software from the lynksis router in to the problem computer
> > (i have two computers and the problem-free computer has the software)...it
> > was working fine under the old linksys router...now, i tried going to the
> > startup menu, but not sure which one to unclick??? these are the
> > choices....any idea?
> >
> > CLIStart
> > stsystra
> > ccApp
> > osCheck
> > jusched
> >
>
> A quic
> > ctfmon
> > IPSecClient Icon
> > Microsoft Office
> >
> > thanks.
> >
> > --
> > bschooler
> >
> >
> >
> > "bobhpdx" wrote:
> >
> > > Thanks - that did it went to start, run, msconfig and turned off trendnet
> > > startup app - works every time now
> >
> > > BobHpdx
> >
> > > "Carl DaVault [MSFT]" wrote:
> >
> > > > There's probably some utility (maybe from Trendnet?) that's disabling
> > > > Windows. You can check the task manager, startup group, services, etc. for
> > > > the application that's doing this.
> >
> > > > If this only happens on reboot, it's probably a service or something that
> > > > runs at startup.
> >
> > > > 3rd-party wireless apps usually leave an icon in the taskbar.
> >
> > > > Hope this helps!
> >
> > > > --
> > > > Standard Disclaimers -
> > > > This posting is provided "AS IS" with no warranties,
> > > > and confers no rights. Please do not send e-mail directly
> > > > to this alias. This alias is for newsgroup purposes only.
> >
> > > > "peter" <pete...@telus.net.ca> wrote in message
> > > >news:zgutd.1551$6f6.173@edtnps89...
> > > > >I had this on my Dell Laptop until I went to administrative tool/ services
> > > > >and turned off wireless zero configuration.
> > > > > This way I used my Netgears configutation utility and now I connect each
> > > > > and every time.
> > > > > peter
> > > > > "bobhpdx" <bobh...@discussions.microsoft.com> wrote in message
> > > > >news:74795992-01A1-4089-9D30-C47CB99FCC6D@microsoft.com...
> >
> > > > >> We have several Dell XP machines with SP2
> >
> > > > >> We recently upgraded our Actiontec DSL gateway the 701 wireless model.
> > > > >> The
> > > > >> XP's connect quickly and easily with Trendnet 11Mbps 802.11b USB
> > > > >> adapters.
> >
> > > > >> However whenever you shut or reboot the Dell XP machine it loses the
> > > > >> checkmark in networking, properties Wireless Networking that instructs XP
> > > > >> to
> > > > >> " use windows to configure my wireless network settings"
> >
> > > > >> So when shutting down or rebooting you need to go back to this option and
> > > > >> instruct XP to use windows to configure the wireless network.
> >
> > > > >> While not critical, it is annoying and I was wondering if anyone knew if
> > > > >> this was a 'undocumented feature' or a bug. Or is there a setting that
> > > > >> cures
> > > > >> this that we have overlooked?
> >
> > > > >> Thanks for any help.
> >
> > > > >> BobH
> > > > >> Quik Internet of Portland- Hide quoted text -
> >
> > - Show quoted text -
>
> Linksys router software has nothing to do with the problem. You need
> to check the problematic wireless adapter PC and disable the included
> management tools / applications. Then, Wireless Zero Configuration
> should be stable.
>
> A quick search of the web, WLTRAY seems to be the Dell wireless
> adapter management tools.
>

=?Utf-8?B?UGhpbA==?=
10-17-08, 09:11 PM
I am writing this letter to ALL Wireless Router manufacturers.
I have a Linksys Wireless Router Model:BEFW11S4. It is 7 years (yes, count
them, all of seven little years) old. I have visited the Linksys website
numerous times trying to set up the WEP/WPA security on that wireless router
(as all responsible wireless router owners should!). I found that there are
no links to any wireless router setting websites that are congruent with the
screen shots from Linksys' own self help technical support site. I have had
to call Linksys several times to resolve this issue only to be placed on hold
for lengthy times (sometimes my call was dropped and I had to start over ....
how sad for such a large company to have such poorly trained phone
receptionists!), then be transferred (see previous comment about the phone
receptionists) to a supposed supervisor, only to finally be transferred to
someone who tells me that the warranty has expired and wants me to pay $40.00
for the technical support to do the right thing that I want and need to do.
First, the device works fine (as evidenced by this e-mail that you have
just received)!
Second, why should I have to pay for doing the right thing?
Third, if I am going to be EXTORTED into buying a new wireless router so
that I can do the right thing and set up an encryption key for a secure
network, what on Gods' Green Earth makes anyone think that I would CHOOSE to
buy another Linksys product when ALL that I have ever received from them is a
functional wireless router (yes, even after seven whole years) and the
crappiest Customer Service/Technical Support I have ever had the displeasure
to encounter!
I shall copy this letter and try to find as many Chat Rooms as possible in
order to spread the word of ALL that I have gone through with the Chain of
Command at the Linksys phone center, well above and beyond what any
reasonable person should expect to go through, and still have NO RELIEF
concerning my singular issue with their product and its capabilities that I
SHOULD be able to enjoy as the owner of said product! What has happend to
"The Customer Is Always Right" Customer Service mantra (I can't say "In
America" because the call was handled in India)? Is the Customer, the ones
that makes the company what it is through the purchase of products, so
worthless to the company that they can just be treated with abject contempt
and scorn? Is the Customer to thus be trampled underfoot? Are we paying to
be so abused? I, for one (yes, one, the beginning of all), shall NOT be
treated in such manner, and CERTAINLY shall NOT PAY to be treated as such!
In this world of expanding technologies, it shall be those with the
GREATEST Customer Appeal that shall continue to be found worthwile in the
publics' eyes (and pocketbooks) and shall grow to meet the demands of a
growing world - ESPECIALLY in the Electronics Department!
It is now my strongest desire that the Linksys Corporation suffers
irreparable damage and goes out of business for their Crappy Customer
Service! I can only hope that I reach enough people around the world to bring
this desire true!

"BSchooler" wrote:

> your messages helped me with the diagnosis...thank you much. very helpful..
> --
> bschooler
>
>
> "smlunatick" wrote:
>
> > On Apr 29, 10:43 pm, BSchooler <BSchoo...@discussions.microsoft.com>
> > wrote:
> > > Pls. Help...i am having same issue as bobhpdx...i recently upgraded Lynksis
> > > routers and now wireless connection disconnects on rebooting....BUT i have
> > > not installed any software from the lynksis router in to the problem computer
> > > (i have two computers and the problem-free computer has the software)...it
> > > was working fine under the old linksys router...now, i tried going to the
> > > startup menu, but not sure which one to unclick??? these are the
> > > choices....any idea?
> > >
> > > CLIStart
> > > stsystra
> > > ccApp
> > > osCheck
> > > jusched
> > >
> >
> > A quic
> > > ctfmon
> > > IPSecClient Icon
> > > Microsoft Office
> > >
> > > thanks.
> > >
> > > --
> > > bschooler
> > >
> > >
> > >
> > > "bobhpdx" wrote:
> > >
> > > > Thanks - that did it went to start, run, msconfig and turned off trendnet
> > > > startup app - works every time now
> > >
> > > > BobHpdx
> > >
> > > > "Carl DaVault [MSFT]" wrote:
> > >
> > > > > There's probably some utility (maybe from Trendnet?) that's disabling
> > > > > Windows. You can check the task manager, startup group, services, etc. for
> > > > > the application that's doing this.
> > >
> > > > > If this only happens on reboot, it's probably a service or something that
> > > > > runs at startup.
> > >
> > > > > 3rd-party wireless apps usually leave an icon in the taskbar.
> > >
> > > > > Hope this helps!
> > >
> > > > > --
> > > > > Standard Disclaimers -
> > > > > This posting is provided "AS IS" with no warranties,
> > > > > and confers no rights. Please do not send e-mail directly
> > > > > to this alias. This alias is for newsgroup purposes only.
> > >
> > > > > "peter" <pete...@telus.net.ca> wrote in message
> > > > >news:zgutd.1551$6f6.173@edtnps89...
> > > > > >I had this on my Dell Laptop until I went to administrative tool/ services
> > > > > >and turned off wireless zero configuration.
> > > > > > This way I used my Netgears configutation utility and now I connect each
> > > > > > and every time.
> > > > > > peter
> > > > > > "bobhpdx" <bobh...@discussions.microsoft.com> wrote in message
> > > > > >news:74795992-01A1-4089-9D30-C47CB99FCC6D@microsoft.com...
> > >
> > > > > >> We have several Dell XP machines with SP2
> > >
> > > > > >> We recently upgraded our Actiontec DSL gateway the 701 wireless model.
> > > > > >> The
> > > > > >> XP's connect quickly and easily with Trendnet 11Mbps 802.11b USB
> > > > > >> adapters.
> > >
> > > > > >> However whenever you shut or reboot the Dell XP machine it loses the
> > > > > >> checkmark in networking, properties Wireless Networking that instructs XP
> > > > > >> to
> > > > > >> " use windows to configure my wireless network settings"
> > >
> > > > > >> So when shutting down or rebooting you need to go back to this option and
> > > > > >> instruct XP to use windows to configure the wireless network.
> > >
> > > > > >> While not critical, it is annoying and I was wondering if anyone knew if
> > > > > >> this was a 'undocumented feature' or a bug. Or is there a setting that
> > > > > >> cures
> > > > > >> this that we have overlooked?
> > >
> > > > > >> Thanks for any help.
> > >
> > > > > >> BobH
> > > > > >> Quik Internet of Portland- Hide quoted text -
> > >
> > > - Show quoted text -
> >
> > Linksys router software has nothing to do with the problem. You need
> > to check the problematic wireless adapter PC and disable the included
> > management tools / applications. Then, Wireless Zero Configuration
> > should be stable.
> >
> > A quick search of the web, WLTRAY seems to be the Dell wireless
> > adapter management tools.
> >

Greg
06-07-09, 01:10 PM
I cannot wirelessly connect. I can hardwired though. Also I get the Zeor
connection message everytime i try to view my wireless netowrks. Can you help
me? I have a Dell Inspirion running XP Home


"Robert L. (MS-MVP)" wrote:

> Even you haven't install the wireless software, it could be other 3rd party
> software. For troubleshooting, start the computer with clean boot.
>
> Windows generalHow to run Windows OS with a clean boot · How to Run Windows
> Safe Mode with Networking · How to setup DHCP for IP Phone How to sort
> programs in Start ...
> www.howtonetworking.com/Windows/windowsgeneral.htm
>
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
> "BSchooler" <BSchooler@discussions.microsoft.com> wrote in message
> news:03F436FB-FE3C-4F5E-9C98-74D9DEAFE4D8@microsoft.com...
> > Pls. Help...i am having same issue as bobhpdx...i recently upgraded
> > Lynksis
> > routers and now wireless connection disconnects on rebooting....BUT i have
> > not installed any software from the lynksis router in to the problem
> > computer
> > (i have two computers and the problem-free computer has the software)...it
> > was working fine under the old linksys router...now, i tried going to the
> > startup menu, but not sure which one to unclick??? these are the
> > choices....any idea?
> >
> > CLIStart
> > stsystra
> > ccApp
> > osCheck
> > jusched
> > WLTRAY
> > ctfmon
> > IPSecClient Icon
> > Microsoft Office
> >
> > thanks.
> >
> > --
> > bschooler
> >
> >
> > "bobhpdx" wrote:
> >
> >>
> >>
> >> Thanks - that did it went to start, run, msconfig and turned off trendnet
> >> startup app - works every time now
> >>
> >> BobHpdx
> >>
> >> "Carl DaVault [MSFT]" wrote:
> >>
> >> > There's probably some utility (maybe from Trendnet?) that's disabling
> >> > Windows. You can check the task manager, startup group, services, etc.
> >> > for
> >> > the application that's doing this.
> >> >
> >> > If this only happens on reboot, it's probably a service or something
> >> > that
> >> > runs at startup.
> >> >
> >> > 3rd-party wireless apps usually leave an icon in the taskbar.
> >> >
> >> > Hope this helps!
> >> >
> >> > --
> >> > Standard Disclaimers -
> >> > This posting is provided "AS IS" with no warranties,
> >> > and confers no rights. Please do not send e-mail directly
> >> > to this alias. This alias is for newsgroup purposes only.
> >> >
> >> >
> >> > "peter" <pete121@telus.net.ca> wrote in message
> >> > news:zgutd.1551$6f6.173@edtnps89...
> >> > >I had this on my Dell Laptop until I went to administrative tool/
> >> > >services
> >> > >and turned off wireless zero configuration.
> >> > > This way I used my Netgears configutation utility and now I connect
> >> > > each
> >> > > and every time.
> >> > > peter
> >> > > "bobhpdx" <bobhpdx@discussions.microsoft.com> wrote in message
> >> > > news:74795992-01A1-4089-9D30-C47CB99FCC6D@microsoft.com...
> >> > >>
> >> > >> We have several Dell XP machines with SP2
> >> > >>
> >> > >> We recently upgraded our Actiontec DSL gateway the 701 wireless
> >> > >> model.
> >> > >> The
> >> > >> XP's connect quickly and easily with Trendnet 11Mbps 802.11b USB
> >> > >> adapters.
> >> > >>
> >> > >> However whenever you shut or reboot the Dell XP machine it loses the
> >> > >> checkmark in networking, properties Wireless Networking that
> >> > >> instructs XP
> >> > >> to
> >> > >> " use windows to configure my wireless network settings"
> >> > >>
> >> > >> So when shutting down or rebooting you need to go back to this
> >> > >> option and
> >> > >> instruct XP to use windows to configure the wireless network.
> >> > >>
> >> > >> While not critical, it is annoying and I was wondering if anyone
> >> > >> knew if
> >> > >> this was a 'undocumented feature' or a bug. Or is there a setting
> >> > >> that
> >> > >> cures
> >> > >> this that we have overlooked?
> >> > >>
> >> > >> Thanks for any help.
> >> > >>
> >> > >> BobH
> >> > >> Quik Internet of Portland
> >> > >
> >> > >
> >> >
> >> >
> >> >
>
>

Greg
06-07-09, 01:21 PM
I cannot connect wirelessly and I cannot even view all connections to choose
a ssid so what am I doing worng?

"Robert L. (MS-MVP)" wrote:

> Even you haven't install the wireless software, it could be other 3rd party
> software. For troubleshooting, start the computer with clean boot.
>
> Windows generalHow to run Windows OS with a clean boot · How to Run Windows
> Safe Mode with Networking · How to setup DHCP for IP Phone How to sort
> programs in Start ...
> www.howtonetworking.com/Windows/windowsgeneral.htm
>
>
> --
> Bob Lin, MS-MVP, MCSE & CNE
> Networking, Internet, Routing, VPN Troubleshooting on
> http://www.ChicagoTech.net
> How to Setup Windows, Network, VPN & Remote Access on
> http://www.HowToNetworking.com
> "BSchooler" <BSchooler@discussions.microsoft.com> wrote in message
> news:03F436FB-FE3C-4F5E-9C98-74D9DEAFE4D8@microsoft.com...
> > Pls. Help...i am having same issue as bobhpdx...i recently upgraded
> > Lynksis
> > routers and now wireless connection disconnects on rebooting....BUT i have
> > not installed any software from the lynksis router in to the problem
> > computer
> > (i have two computers and the problem-free computer has the software)...it
> > was working fine under the old linksys router...now, i tried going to the
> > startup menu, but not sure which one to unclick??? these are the
> > choices....any idea?
> >
> > CLIStart
> > stsystra
> > ccApp
> > osCheck
> > jusched
> > WLTRAY
> > ctfmon
> > IPSecClient Icon
> > Microsoft Office
> >
> > thanks.
> >
> > --
> > bschooler
> >
> >
> > "bobhpdx" wrote:
> >
> >>
> >>
> >> Thanks - that did it went to start, run, msconfig and turned off trendnet
> >> startup app - works every time now
> >>
> >> BobHpdx
> >>
> >> "Carl DaVault [MSFT]" wrote:
> >>
> >> > There's probably some utility (maybe from Trendnet?) that's disabling
> >> > Windows. You can check the task manager, startup group, services, etc.
> >> > for
> >> > the application that's doing this.
> >> >
> >> > If this only happens on reboot, it's probably a service or something
> >> > that
> >> > runs at startup.
> >> >
> >> > 3rd-party wireless apps usually leave an icon in the taskbar.
> >> >
> >> > Hope this helps!
> >> >
> >> > --
> >> > Standard Disclaimers -
> >> > This posting is provided "AS IS" with no warranties,
> >> > and confers no rights. Please do not send e-mail directly
> >> > to this alias. This alias is for newsgroup purposes only.
> >> >
> >> >
> >> > "peter" <pete121@telus.net.ca> wrote in message
> >> > news:zgutd.1551$6f6.173@edtnps89...
> >> > >I had this on my Dell Laptop until I went to administrative tool/
> >> > >services
> >> > >and turned off wireless zero configuration.
> >> > > This way I used my Netgears configutation utility and now I connect
> >> > > each
> >> > > and every time.
> >> > > peter
> >> > > "bobhpdx" <bobhpdx@discussions.microsoft.com> wrote in message
> >> > > news:74795992-01A1-4089-9D30-C47CB99FCC6D@microsoft.com...
> >> > >>
> >> > >> We have several Dell XP machines with SP2
> >> > >>
> >> > >> We recently upgraded our Actiontec DSL gateway the 701 wireless
> >> > >> model.
> >> > >> The
> >> > >> XP's connect quickly and easily with Trendnet 11Mbps 802.11b USB
> >> > >> adapters.
> >> > >>
> >> > >> However whenever you shut or reboot the Dell XP machine it loses the
> >> > >> checkmark in networking, properties Wireless Networking that
> >> > >> instructs XP
> >> > >> to
> >> > >> " use windows to configure my wireless network settings"
> >> > >>
> >> > >> So when shutting down or rebooting you need to go back to this
> >> > >> option and
> >> > >> instruct XP to use windows to configure the wireless network.
> >> > >>
> >> > >> While not critical, it is annoying and I was wondering if anyone
> >> > >> knew if
> >> > >> this was a 'undocumented feature' or a bug. Or is there a setting
> >> > >> that
> >> > >> cures
> >> > >> this that we have overlooked?
> >> > >>
> >> > >> Thanks for any help.
> >> > >>
> >> > >> BobH
> >> > >> Quik Internet of Portland
> >> > >
> >> > >
> >> >
> >> >
> >> >
>
>

Jack [MVP-Networking]
06-07-09, 03:36 PM
Hi
Maybe this can Help, http://www.ezlan.net/wireless.html
Jack (MS, MVP-Networking)

"Greg" <Greg@discussions.microsoft.com> wrote in message
news:D6B29076-14A3-4488-BF37-0E4072941A08@microsoft.com...
>I cannot connect wirelessly and I cannot even view all connections to
>choose
> a ssid so what am I doing worng?
>
> "Robert L. (MS-MVP)" wrote:
>
>> Even you haven't install the wireless software, it could be other 3rd
>> party
>> software. For troubleshooting, start the computer with clean boot.
>>
>> Windows generalHow to run Windows OS with a clean boot · How to Run
>> Windows
>> Safe Mode with Networking · How to setup DHCP for IP Phone How to sort
>> programs in Start ...
>> www.howtonetworking.com/Windows/windowsgeneral.htm
>>
>>
>> --
>> Bob Lin, MS-MVP, MCSE & CNE
>> Networking, Internet, Routing, VPN Troubleshooting on
>> http://www.ChicagoTech.net
>> How to Setup Windows, Network, VPN & Remote Access on
>> http://www.HowToNetworking.com
>> "BSchooler" <BSchooler@discussions.microsoft.com> wrote in message
>> news:03F436FB-FE3C-4F5E-9C98-74D9DEAFE4D8@microsoft.com...
>> > Pls. Help...i am having same issue as bobhpdx...i recently upgraded
>> > Lynksis
>> > routers and now wireless connection disconnects on rebooting....BUT i
>> > have
>> > not installed any software from the lynksis router in to the problem
>> > computer
>> > (i have two computers and the problem-free computer has the
>> > software)...it
>> > was working fine under the old linksys router...now, i tried going to
>> > the
>> > startup menu, but not sure which one to unclick??? these are the
>> > choices....any idea?
>> >
>> > CLIStart
>> > stsystra
>> > ccApp
>> > osCheck
>> > jusched
>> > WLTRAY
>> > ctfmon
>> > IPSecClient Icon
>> > Microsoft Office
>> >
>> > thanks.
>> >
>> > --
>> > bschooler
>> >
>> >
>> > "bobhpdx" wrote:
>> >
>> >>
>> >>
>> >> Thanks - that did it went to start, run, msconfig and turned off
>> >> trendnet
>> >> startup app - works every time now
>> >>
>> >> BobHpdx
>> >>
>> >> "Carl DaVault [MSFT]" wrote:
>> >>
>> >> > There's probably some utility (maybe from Trendnet?) that's
>> >> > disabling
>> >> > Windows. You can check the task manager, startup group, services,
>> >> > etc.
>> >> > for
>> >> > the application that's doing this.
>> >> >
>> >> > If this only happens on reboot, it's probably a service or something
>> >> > that
>> >> > runs at startup.
>> >> >
>> >> > 3rd-party wireless apps usually leave an icon in the taskbar.
>> >> >
>> >> > Hope this helps!
>> >> >
>> >> > --
>> >> > Standard Disclaimers -
>> >> > This posting is provided "AS IS" with no warranties,
>> >> > and confers no rights. Please do not send e-mail directly
>> >> > to this alias. This alias is for newsgroup purposes only.
>> >> >
>> >> >
>> >> > "peter" <pete121@telus.net.ca> wrote in message
>> >> > news:zgutd.1551$6f6.173@edtnps89...
>> >> > >I had this on my Dell Laptop until I went to administrative tool/
>> >> > >services
>> >> > >and turned off wireless zero configuration.
>> >> > > This way I used my Netgears configutation utility and now I
>> >> > > connect
>> >> > > each
>> >> > > and every time.
>> >> > > peter
>> >> > > "bobhpdx" <bobhpdx@discussions.microsoft.com> wrote in message
>> >> > > news:74795992-01A1-4089-9D30-C47CB99FCC6D@microsoft.com...
>> >> > >>
>> >> > >> We have several Dell XP machines with SP2
>> >> > >>
>> >> > >> We recently upgraded our Actiontec DSL gateway the 701 wireless
>> >> > >> model.
>> >> > >> The
>> >> > >> XP's connect quickly and easily with Trendnet 11Mbps 802.11b USB
>> >> > >> adapters.
>> >> > >>
>> >> > >> However whenever you shut or reboot the Dell XP machine it loses
>> >> > >> the
>> >> > >> checkmark in networking, properties Wireless Networking that
>> >> > >> instructs XP
>> >> > >> to
>> >> > >> " use windows to configure my wireless network settings"
>> >> > >>
>> >> > >> So when shutting down or rebooting you need to go back to this
>> >> > >> option and
>> >> > >> instruct XP to use windows to configure the wireless network.
>> >> > >>
>> >> > >> While not critical, it is annoying and I was wondering if anyone
>> >> > >> knew if
>> >> > >> this was a 'undocumented feature' or a bug. Or is there a
>> >> > >> setting
>> >> > >> that
>> >> > >> cures
>> >> > >> this that we have overlooked?
>> >> > >>
>> >> > >> Thanks for any help.
>> >> > >>
>> >> > >> BobH
>> >> > >> Quik Internet of Portland
>> >> > >
>> >> > >
>> >> >
>> >> >
>> >> >
>>
>>

Lem
06-07-09, 03:38 PM
Greg wrote:
> I cannot wirelessly connect. I can hardwired though. Also I get the Zeor
> connection message everytime i try to view my wireless netowrks. Can you help
> me? I have a Dell Inspirion running XP Home

You'll have to do better than "I get the Zeor connection message" if you
want any help.

see:
http://66.39.69.143/goodpost.htm
http://support.microsoft.com/kb/555375

If you have an Inspiron laptop, try turning the wifi radio on: see your
laptop User Guide for details (probably Fn+F2).



--
Lem -- MS-MVP

To the moon and back with 2K words of RAM and 36K words of ROM.
http://en.wikipedia.org/wiki/Apollo_Guidance_Computer
http://history.nasa.gov/afj/compessay.htm