PDA

View Full Version : Re: I disabled wireless on my router. How do I enable??



Jeff Liebermann
04-20-08, 03:01 PM
On Sun, 20 Apr 2008 11:19:04 -0700 (PDT), kwaldman@gmail.com wrote:

>While trying to troubleshoot some router problems, I disabled wireless
>for my linksys router through the basic setup at 192.168.1.1. Under
>the Wireless options, there's a radio button for enable and disable. I
>clicked disable, saved the settings, and now I can't connect to the
>router through the IP address listed above. I tried resetting the
>router and still can't connect.
>
>Does anyone have any ideas how I can enable the router again?

Nope. No clue since you didn't bother to supply the maker and model
number. Go to the manufacturers web pile and read the reset
procedure. Some require holding down the reset button for an extended
period before they actually rest the router. Others don't really
offer a reset and will clear the flash ram when the reset button is
held down. Some have to be reset within the first few seconds of
applying power, or nothing happens. Linksys is especially tricky, but
the procedure varies with model number. In general, if you held it
down for 30 seconds or more, it should properly reset. Meanwhile, try
plugging your computah's ethernet port into one of the LAN ports and
see if you can reset it from the web based admin menu. Also, you
might want to remember or scribble onto paper what you're doing so
that you later undo the damage.

--
Jeff Liebermann jeffl@cruzio.com
150 Felker St #D http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558