PDA

View Full Version : need help



wallahham
03-28-08, 12:41 AM
dear friends
i have belkin model f5d1632-4 i cant access its main page at
192.168.2.1
i tried to reset it several times noting
in the lan connection "ie every thing in auto in tcip properties"
it dont take an ip it takes virtual ip in autoconfigaring ip4 like
169.254.157.242
i think the main proplem that i cant access the main page at
192.168.2.1
can any one help

GlowingBlueMist
03-28-08, 06:39 AM
"wallahham" <waellhm@gmail.com> wrote in message
news:fc0bf007-d1fc-4143-97db-0205fb15ef15@s50g2000hsb.googlegroups.com...
> dear friends
> i have belkin model f5d1632-4 i cant access its main page at
> 192.168.2.1
> i tried to reset it several times noting
> in the lan connection "ie every thing in auto in tcip properties"
> it dont take an ip it takes virtual ip in autoconfigaring ip4 like
> 169.254.157.242
> i think the main proplem that i cant access the main page at
> 192.168.2.1
> can any one help
If your pc is reporting it's IP address as starting with 169 then your PC is
not getting an IP address from the router.

You may have a bad or wrong (x-over instead of a straight through) IP cable
or some other problem. Some PC's need to be assigned a fixed IP in the
192.168.2.xxx range and have the default gateway set to 192.168.2.1 in
order to make contact built in web pages.

The following link is from the Belkin help section. While the router used
in the example is not the same as yours (which was not listed when I
searched Belkin's help section) it should be able to get you working.

http://www.belkin.com/support/article/?lid=en&pid=F5D6231-4&aid=2440&scid=221