PDA

View Full Version : how hot is to hot for a celeron 600 overclocked



yikes
12-21-00, 08:30 AM
my temps for my celeron 600 at 855 are 34'C idle and 45'C full is that too hot or should i keep overclocking? oh and how much thermal paste/glue should i use between the heatsink and cpu?

thanks
yikes

jdblitz
12-21-00, 09:05 AM
well, yeah that is pretty high, also what mobo/memory/hsfan are you running?

JD

yikes
12-21-00, 09:26 AM
i have a soyo 6vba 133 via appollo board, with 128 mb ram, not sure what type of ram? its 133 mhz though. glob-orb heatsink
thanks yikes

p.s whats the best utility for checking the temp of chip and mb

yikes

Gyga-Bite
12-21-00, 12:39 PM
Holy jesus! That high of a temp with a Golden Orb!!!! You live near the equator dont you? http://www.speedguide.net/ubb/biggrin.gif. Are you sure all of your system fans are working properly? What kind of case do you have your setup in? Small cheaper cases mean less air flow/weaker-less fans, etc. Maybe a nice new case could answer your woe's.

glc1
12-21-00, 12:50 PM
Originally posted by yikes:
p.s whats the best utility for checking the temp of chip and mbProbably the motherboard's BIOS.

HongKongPolice
12-21-00, 02:56 PM
Get a good 60mm fan 'n put it on the orb with hot glue, also make sure you got good thermal compound on the CPU

Amro
12-21-00, 05:55 PM
this is a celeron man. yeesh my 433 ran that hot w/ out bein o/c. same w/ this stupid p3. ...o/c...my celeron ran fine at those same temps. u should be ok, just don't shoot the voltage up

freckmoto
12-21-00, 06:05 PM
I would be fine with those temps, but then again, I am running a duron.

Freckmoto

------------------
Abit KT7 RAID
Duron 600 @ 1000mhz
OCZ Monster 2 Heatsink
256mb PC133 Infineon 222
10 gig
TNT2
Aureal Vortex 2

glc1
12-21-00, 06:25 PM
Yeah, I think AMD CPUs actually run hotter.

[This message has been edited by glc1 (edited 12-21-2000).]

Amro
12-21-00, 08:12 PM
seriously man it's totally fine, this pos sometimes runs in the 50s!

HongKongPolice
12-21-00, 08:16 PM
Its a Coppermine Celeron, these shouldn't run any hotter than 40C or so, they can't withstand as much heat as AMD cpuz

Merc
12-21-00, 09:13 PM
About your thermal paste they say take a razorblade and GENTLY rub it across the core. Get artic Silver it is worth the extra money but it is the best thermal paste out there. www.coolerguys.com (http://www.coolerguys.com) you can get all your cooling needs their.

RoundEye
12-21-00, 09:16 PM
Look at table 37 on page 57. It shows the max temp @90. I know you don't want it that hot, but that's the temp it can get to before the transistor junctions start to breakdown.

Intel (http://developer.intel.com/design/celeron/datashts/24365815.pdf)



------------------
Too much rat race, not enough cheese.

HongKongPolice
12-21-00, 09:36 PM
Ya CPUs can withstand really high temps, but i'm talking about OPERATING temps. Coppermines won't run stable @ any higher than round 50C while AMD Cpus are quite happy @ 50C

YARDofSTUF
12-22-00, 12:23 AM
so my no fan cele 566 at 32 is ok?

yikes
12-22-00, 09:58 AM
Yeah thanks guys and girls, i took off the heatsink and fan and put some fresh thermal grease on it now it runs super cool!!! 31 no load. 34 or 35 max at full load!!!

yikes