PDA

View Full Version : During the installation........


enarceus
05-30-07, 03:16 AM
During the installation of Windows NT on your dual processor motherboard with two processors, only one CPU is detected. Why is the second CPU not detected?
YeOldeStonecat
05-30-07, 06:01 AM
Which version of NT?
And you're positive the BIOS is enabling the second CPU?
Which motherboard and processor(s)?
enarceus
06-27-07, 04:11 AM
Which version of NT?
windows NT 3.1 version

Which motherboard and processor(s)?
d850 emvr motherboard and processor is p4 3.0 ghz!
A_old
06-27-07, 07:26 AM
Sweet jesus -- NT 3.51????? :rotfl: :rotfl: :rotfl:

See if this is helpful

http://www.tyan.com/archive/support/html/f_tm.html -- specifically #12.

Please, do tell why you wouldn't use an OS that MS at least still supports (older software that will not run?)
A_old
06-27-07, 01:03 PM
windows NT 3.1 version

d850 emvr motherboard and processor is p4 3.0 ghz!

What model P4? are you sure it isn't a hyperthreaded single core proc, at which point you probably need to enable hyperthreading in the bios and reinstall NT 3.51.
Brk
06-27-07, 01:22 PM
Give me your Paypal address and I will send you some money to buy an OS from this century.
YARDofSTUF
06-27-07, 01:30 PM
Give me your Paypal address and I will send you some money to buy an OS from this century.

:rotfl:
A_old
06-27-07, 02:18 PM
Give me your Paypal address and I will send you some money to buy an OS from this century.

:rotfl: :rotfl:
enarceus
08-20-07, 07:29 AM
Give me your Paypal address and I will send you some money to buy an OS from this century.

Are you sure!
~~~~~~~~~~~~~are you very rich?~~~~~~~~~~~~~
what this century means?
A_old
08-20-07, 03:52 PM
a century is a 100 year period..so he means an operating system released after the year 2000