PDA

View Full Version : nvMonitor question



Addict
03-28-07, 11:58 PM
Any idea why nvMonitor shows my memory with a yellow square? I thought it might be the voltage setting so I changed it to 2.1v. That didn't work so I manually set my timings (4-4-3-5). Still no dice.

This is on a BFG 680i motherboard. Latest BIOS & drivers.

Any ideas?
http://gallery.digitaldeviation.com/d/2382-3/nvmonitor.JPG

YARDofSTUF
03-29-07, 12:51 AM
Probably because the defualt voltage for ram is 1.8v, even though memory makers are making ram that needs 1.9-2.4v.

Dont sweat it, run the ram at the volts it needs.

Addict
03-29-07, 06:36 AM
Probably because the defualt voltage for ram is 1.8v, even though memory makers are making ram that needs 1.9-2.4v.

Dont sweat it, run the ram at the volts it needs.
1.8v is what it started at by default. Still had yellow.

Everything seems fine for now, though I haven't had a chance to stress test it.