PDA

View Full Version : Quick Asus P4P800 RAM question



westy
03-25-07, 10:22 AM
I was wondering if I added an additional 1 GB PC3200 DDR400 P/N: VS512MB400 to my existing 1 GB Corsair CMX512-3200C2 how it would run. The added memory is value select.

Thoughts?

YARDofSTUF
03-25-07, 10:52 AM
Well If the timings on the value select are higher than the other corsair stick then you need to raise the timings in the bios.

westy
03-25-07, 11:18 AM
Since it's value select, I'm guessing it will probably have to get cranked up a tad. Does it effect the dual channel settings with 4 512's instead of 2 ?

YARDofSTUF
03-25-07, 11:36 AM
It might default to a lower speed with all 4 slots filled. Check your manual.