PDA

View Full Version : resetting admin password



mountainman
11-13-04, 01:18 PM
How do I reset my password on the Linsys WAP54G?

Thanks.

Set
11-13-04, 01:35 PM
There should be a reset button (Looks like a little hole) on the back.. Hold that down for 30 sec or so

Should do the trick

Set
11-13-04, 01:38 PM
Off there site

"changed the routers password, and I forgot what I changed it to. Is there anything I can do?



Answer

Hold the reset button on the unit for 30 seconds or more and the router will be restored to factory defaults. This also means that your configuration will be set to factory defaults also, so if your router is configured for your ISP you may loose your connection until you set the unit up again. The default password for the router is admin in lower case letters""

mountainman
11-13-04, 01:38 PM
OK... I gave it a solid 20 since the manual said 10 will reset back to factory settings.

I'll go a solid 30 this time.

:)

Blisster
11-13-04, 01:40 PM
i think it needs to be plugged in while you do it too.

Set
11-13-04, 01:41 PM
OK... I gave it a solid 20 since the manual said 10 will reset back to factory settings.

I'll go a solid 30 this time.

:)


Yea its a crap shoot... Make sure it has power to it tho

Set
11-13-04, 01:42 PM
i think it needs to be plugged in while you do it too.

Stop Reading my mind :D


"puts on tin foil hat""

mountainman
11-13-04, 01:42 PM
Crap! I finally plugged it in....

J/k..

I got it reset and up and going. Thanks!

(It was throwing me off cuz there is no username. Just a password.)

Thanks, y'all!