PDA

View Full Version : How do these settings look...



TrevGlas
11-21-03, 12:46 PM
CPU FREQ = 145 = 2600 mhz

DRAM FREQUENCY = 333 (not 400 because the 533 Fsb/ddr ratio isnt supported on my board)

AGP/PCI Frequency = 66.66/33.33

Vcore = 1.6

DDR Reference Voltage = 2.55v

AGP VDDQ Voltage = 1.50v

What would you guys change?

YARDofSTUF
11-21-03, 12:57 PM
Looking good.

What CPU/Mobo/Ram?

Cpu is a P4 what speed and what fsb STOCK?

TrevGlas
11-21-03, 01:01 PM
2400 mhz stock
533 FSB stock
Geil Golden Dragon RAM PC 3500

I want to raise the ram speed a little though.

Oh yeah asus p4p800 deluxe mobo

YARDofSTUF
11-21-03, 01:10 PM
Reading the manual for your mobo it says that it supports 400. I don't understand your explanation on teh 333 above.

TrevGlas
11-21-03, 01:34 PM
Well certain FSB/DDR ratios are not supported. 533/400 is one of the non-supported ones. In order to get the 400 mhz memory clock, I have to get a 800 mhz fsb processor, as the 800/400 is supported. :(

Its always something.

TrevGlas
11-21-03, 01:34 PM
I read that in the manual. Not sure which page though.

YARDofSTUF
11-21-03, 02:26 PM
so what does auto give u?

TrevGlas
11-21-03, 04:22 PM
Auto gives me the 333....

TrevGlas
11-21-03, 04:25 PM
The ram is running at 350 now... think thats good enough? Till I get an 800 FSB HT p4 ? ALso, do I get any benefit if the FSB/DRAM clocks are the same?

175 / 175?

YARDofSTUF
11-21-03, 08:39 PM
Originally posted by TrevGlas
The ram is running at 350 now... think thats good enough? Till I get an 800 FSB HT p4 ? ALso, do I get any benefit if the FSB/DRAM clocks are the same?

175 / 175?


Good question, I dunno for the P4s