PDA

View Full Version : Question about CAS/timing



TrevGlas
11-18-03, 12:42 PM
Ok - my RAM is rated at CAS 2 timing 6-3-3-1t

I set the CAS to 2, and I see these settings also.

Ras Precharge
Ras to Cas Latency
Precharge Delay
Burst Length

I'm assuming these are the timing settings. IF so, which one of these do the 6-3-3-1t refer to? Thanks alot.

Trev

YARDofSTUF
11-18-03, 12:47 PM
CAS - 2
Ras Precharge - 6
Ras to Cas - 3
Precharge Delay -3
Burst Length - 1T I think this is the burst length (my board calls this somethign else)

TrevGlas
11-18-03, 01:02 PM
Thx YoS

TrevGlas
11-18-03, 01:07 PM
My bios wont allow those settnigs that you mentioned before

Ras Precharge can only be 2,3,4
Ras to Cas can only be 2,3,4
DRAM Precharge can only be 5,6,7,8
Burst Length can either be 4 or 8

Thx for the help

TrevGlas
11-18-03, 01:09 PM
Bump

YARDofSTUF
11-18-03, 01:22 PM
Originally posted by TrevGlas
My bios wont allow those settnigs that you mentioned before

Ras Precharge can only be 2,3,4
Ras to Cas can only be 2,3,4
DRAM Precharge can only be 5,6,7,8
Burst Length can either be 4 or 8

Thx for the help


3
3
6
4


In order that you posted.

TrevGlas
11-18-03, 01:37 PM
K thx for the info. I am super noob at OC'ing :)