PDA

View Full Version : memory benchmarks (seem slow??)



Blisster
05-10-03, 07:04 PM
http://www.westcoastelite.com/images/Bstuff/memory1.jpg

This is My Corsair XMS3200LLPT running at 400MHz, does this seem slow to any of you????
any recommendations on tweaking it?

Mark
05-10-03, 07:18 PM
i can't read the picture , but at 192fsb i score about 2998 or so, maybe alittle less.

are you running the ram in sync with the fsb ?

YARDofSTUF
05-10-03, 07:21 PM
run the ram at the speed of the fsb, so if the fsb is 190 u want the ram at 380

Blisster
05-10-03, 07:34 PM
no i wasn't ill give that a try.

fish59
05-10-03, 07:54 PM
Try these settings

http://webpages.charter.net/mlanter/set.jpg

Blisster
05-10-03, 10:23 PM
http://www.westcoastelite.com/images/Bstuff/memory2 copy.jpg

okay, so this is what i scored after overclocking my FSB up to 166 and setting the memory timings at 100%.

any thoughts?

YARDofSTUF
05-10-03, 10:35 PM
much better!

Mark
05-10-03, 11:42 PM
crap i went to 196 4-2-2-2 and got a hard drive corrupt, reinstalling windows right now, good thing for partions, probaly only lost some stupid pictures.

@ 196 6-2-2-2 i got like 2980 or so.

Scott
05-11-03, 08:54 AM
I am getting 3067 at 199 (BIOS) or 201( Sandra) @ 6-2-2-2. I am not sure why I get two different FSB settings by the two programs.

Can't go past 6-2-2-2, or it doesn't post and I have to swap memory.

RoundEye
05-11-03, 03:06 PM
I have the Gigabyte 8INXP mobo, the board seems to be really performing well for me. I'm really happy with it, I think I'm going to keep it for a while. :D


I don't know why, but every benchmark in Sandra wants to compare the board to a dual CPU setup. I only have one processor and it's a 2.6 @ 3.07.


http://members.cox.net/roundeye/gbram.jpg