The Broadband Guide
SG
search advanced

TP-Link TD-W8950ND

details: 150Mbps Wireless Lite N ADSL2+ Modem Router
hardware type: DSL Wireless Router
date added: 2010-07-05
updated: 2015-02-16
The TD-W8950ND is a 3-in-1 device that combines the function of a high-speed DSL modem, a 4-Port 10/100Mbps NAT router and a wireless Lite N access point.

TD-W8950ND is a high speed solution that complies with wireless 802.11b/g, and is compatible with 802.11n standard. Based on Lite N technology and with CCA automatically avoiding channel conflicts, TD-W8950ND provides speeds of up to 150Mbps. It features a QSS/WPS button for easy wireless security configuration.

This router provides VPN pass-through for IPSec and PPTP, allowing you to establish up to 10 simultaneous IPSec tunnels.

The device comes with a CD with an Easy Setup Assistant that helps you step by step to complete your Internet connection, wireless network settings and security configurations.
 
 
 
 TD-W8950ND Features
 General
 Availability: currently available
 LAN / WAN Connectivity
 WAN throughput: 24 Mbps
 WAN throughput upstream: 1 Mbps
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 ToS / DiffServ: yes
 UPnP: yes
 MAC Address clone: yes
 Transparent Bridging (IEEE 802.1d): yes
 Routing Protocols: IGMP Multicast (RFC 1112)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 150 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (draft)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
 WiFi modes: Access point
Wireless bridge (PtP)
 external antenna(s): 1
 Antenna gain: 3 dBi
 Transmit Power: +19 dBm
 Receiver Sensitivity: -68 dBm
 WDS compatible: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 VPN
  IPSec
 IPSec passthrough: yes
 IPSec simultaneous tunnels: 10
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Quick Setup Wizard
Windows application
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Usage Statistics: yes
 Diagnostic functions: yes
 Misc hardware info
 SNMP support: SNMP v.2
 NTP client: yes
 Links
 Product page: http://www.tp-link.com/en/products/detai...
 Datasheet: http://www.tp-link.com/support/todownloa...
 Manual: http://www.tp-link.com/resources/softwar...
 Quick Install Guide: http://www.tp-link.com/Resources/documen...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About