With appropriate Power over Ethernet (PoE) support, you only need to run one cable to the AP to deliver both data and power. Ceiling-mounted design makes it easy for you to fix the device on the roof for wireless signal coverage. 4 working modes are supported by the device. Firstly, the most commonly used mode is AP. The second mode is Bridge in which you can connect two LANs with two APs. The third mode is P2MP in which you can bridge multiple wired LANs by APs. The fourth mode is Repeating mode.
| W301A Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| LAN ports: | 1 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) |
| WiFi modes: |
Access point Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode |
| Transmit Power: | +20 dBm |
| Receiver Sensitivity: | -73 dBm |
| Default SSID: | Tenda |
| WDS compatible: |
|
| Device Management | |
| Default IP address: | 192.168.0.254 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | http://www.tenda.cn/tendacn/Product/show... |
| Manual: | http://www.tenda.cn/uploadfile/downloads... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|