The TCW770 has a Wi-Fi 802.11n draft 2.0 wireless interface, offering speeds of up to 150 Mbps. It also supports IPv4 and IPv6 and provides MPEG2 over IP Encapsulation.
| TCW770 Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN throughput: |
440 Mbps |
| WAN throughput upstream: |
131 Mbps |
| WAN ports: |
1 |
| WAN port(s) type: | Coax F-connector |
| LAN ports: | 4 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| USB port(s): |
1 |
| USB port type: | USB 2.0 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Cable Modem | |
| DOCSIS compliance: |
DOCSIS 2.0 DOCSIS 3.0 EuroDOCSIS 3.0 |
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft 2.0) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) |
| WiFi modes: | Access point |
| internal antenna(s): | 2 |
| external antenna(s): | 2 |
| WPS (Wi-Fi Protected Setup): |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, date/time scheduling |
| Device Management | |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard TFTP (RFC 1350) |
| Firmware upgradeable: |
|
| Email alerts: |
|
| Event log: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.2, SNMP v.3 |
| IPv6 support: |
|
| Links | |
| Product page: | http://www.technicolor.com/en/solutions-... |
| Datasheet: | http://www.speedguide.net/images/hardwar... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
anonymous - 2010-10-17 03:33
Works poorly as a router. Breaking internet connection when IP-flood detection is enabled. Problems with NAT. There's a conflict how the modem handles DNS forwarding for DHCP clients. For some reason the modem forwards the ISP's DNS IP-address directly to the clients when the modem has internet connection instead of using the modems own LAN IP. When he modem has no internet connection, DNS IP-address is the modems own LAN IP. This causes DNS errors when the client is connected to the router before the router has established internet connection. In other words, first boot up the modem. Wait for internet connection and then boot up the computer. If this is done the other way, the client gets the wrong DNS IP and internet connection can only be restored by IPconfig/release - renew.
I agree. It's a horrific router. Not fit for purpose. When I tried to open more than 1 browser tab things would grind to a halt. I have deactivated its wireless, put it into modem-only mode, and connected it to a proper DD-WRT router. Now my internet connection works flawlessly :)
how do you put this thing in modem only mode?
horrible inconsistent connection, and it freezes up when i open more than 3-4 tabs in my browser at once. the router also gives me high ms and ping on games, which is pretty unacceptable for a gamer like myself.
Hey, users
Anybody knows how to enable usb for hard drive on this router? |
|
|