The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

SparkLAN WRTR-142

details: 802.11g AP Router
hardware type: Wireless Router
date added: 2010-01-12
updated: 2012-09-03
The WRTR-142 is a wireless router with one 10/100Base-T WAN port and four 10/100Base-T LAN ports. It can operate in Wireless Bridge, WISP, WDS, and AP modes.

The integrated access point complies with IEEE 802.11b/g standards, providing wireless transmission speeds of up to 54Mbps. It supports WEP and WPA/WPA2 wireless encryption and 802.1x authentication.

The router provides VPN pass-through for IPSec, L2TP and PPTP. It features a built-in firewall to protect the network against hackers and Denial of Service (DoS) attacks. It can be easily configured via Web-based configuration utility, including a Quick Setup Wizard.
 
 
 
 WRTR-142 Features
 General
 Availability: currently available
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: 10/100 Base-TX (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 MAC Address clone: yes
 Transparent Bridging (IEEE 802.1d): yes
 Routing Protocols: Spanning Tree Protocol (STP)
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
SSID Broadcast disable
 WiFi modes: Access point
Wireless client
Wireless bridge (PtP)
Multipoint bridge (PtMP)
WISP mode
 external antenna(s): 1
 ext antenna(s) removable ?: yes
 Antenna connector: RP-SMA (Reverse SMA)
 Antenna gain: 2 dBi
 Transmit Power: +14 dBm
 Receiver Sensitivity: -68 dBm
 Default SSID: RTL8186-GW
 WDS compatible: yes
 VPN
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 DoS / DDoS protection: yes
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering
 Device Management
 Default IP address: 192.168.1.254
 Default admin username: n/a
 Default admin password: n/a
 Administration: Web-based (LAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Misc hardware info
 NTP client: yes
 Links
 Product page: http://www.sparklan.com/product.php?func...
 Datasheet: http://www.sparklan.com/downloadDataShee...
 Manual: http://www.sparklan.com/downloadSupport....
 Quick Install Guide: http://www.sparklan.com/downloadSupport....

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About