The Broadband Guide
SG
search advanced

Sitecom WLR-4100

details: N300 Wi-Fi Router
hardware type: Wireless Router
date added: 2012-12-26
updated: 2014-09-23
This router is compliant with 802.11n and up to 6 times faster than standard 802.11g based routers while still being compatible with 802.11g & 802.11b devices. This router is not only a Wireless Access Point, but also doubles as a 4-port full-duplex Gigabit switch that connects your wired-Ethernet devices together at 10/100/1000 Mbps speeds.

At 300 Mbps wireless transmission rate, the Access Point built into the router uses advanced MIMO (Multi-Input, Multi-Output) technology to transmit multiple streams of data in a single wireless channel, giving you seamless access to multimedia content. The robust RF signal travels farther, eliminates dead spots and extends the network range. For data protection and privacy, the router encodes all wireless transmissions with WEP, WPA, or WPA2 encryption.

With the built-in DHCP Server & SPI firewall, the router protects your computers against intruders and most known Internet attacks and also provides safe VPN pass-through.
 
 
 
 WLR-4100 Features
 General
 Availability: currently available
 Warranty: 10 year(s)
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: Gigabit Ethernet (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 4
 LAN ports type: Gigabit Ethernet (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 Wireless
 Maximum Wireless Speed: 300 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
SSID Broadcast disable
 WiFi modes: Access point
 internal antenna(s): 3
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 VPN
  IPSec
 IPSec passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Device Management
 Default IP address: 192.168.0.1
 Default admin username: admin
 Default admin password: (label on the bottom of device)
 Administration: Web-based (LAN)
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Misc hardware info
 NTP client: yes
 Links
 Product page: http://www.sitecom.com/wi-fi-router-x4-n...
 Datasheet: http://www.sitecom.com/showdownload.php?...
 Manual: http://www.sitecom.com/download/5339/WLR...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About