This device is compatible with the latest ADSL standards, including ADSL2 and ADSL2+, and supports up to 24 Mbps downstream and 1.5 Mbps upstream to deliver true broadband speed and throughput. The DSL router supports wireless 802.11b/g/n and the following security protocols: WEP, WPA, WPA2, and PSK.
The router features a built-in SPI firewall to protect the network against Denial of Service (DoS) attacks.
| RP-WD5714H Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN throughput: |
24 Mbps |
| WAN throughput upstream: |
1 Mbps |
| WAN ports: |
1 |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) VLAN tagging (802.1q) IGMP Multicast (RFC 1112) |
| DSL | |
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5) |
| PPPoE client: |
|
| PPPoA client: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) |
| WiFi modes: | Access point |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Antenna gain: | 2 dBi |
| WDS compatible: |
|
| WPS (Wi-Fi Protected Setup): |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard Telnet / CLI |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.1, SNMP v.2 |
| NTP client: |
|
| Links | |
| Product page: | https://www.repotec.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|