The Broadband Guide
SG
search advanced

Prolink WNR1011

details: 4G Wireless-N Mobile Router
hardware type: Travel Router
date added: 2012-02-03
updated: 2020-03-21
The router has one LAN/WAN port. An RJ-45 converter cable (provided with the package) is required to use the LAN/WAN connector.

The unit has a built-in 2400mAh rechargeable battery, and supports auto APN, allowing for an automatic dial-up/3G/4G connection without any preset profiles. The router can supply power from its battery to electronic products connected via USB as well.
 
 
 
 WNR1011 Features
 General
 Availability: discontinued
 Warranty: 1 year(s)
 LAN / WAN Connectivity
 WAN ports: 1
one RJ-45 WAN port
 WAN port(s) type: 3G/4G USB port
 USB port(s): 1
 USB port type: USB 2.0
 Router
 NAT routing: yes
 Multihomed: yes
 DHCP server: yes
 DHCP client: yes
 UPnP: yes
 Wireless
 Maximum Wireless Speed: 300 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
 WiFi modes: Access point
 WPS (Wi-Fi Protected Setup): yes
 VPN
  IPSec
 IPSec passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering
 Device Management
 Default IP address: 192.168.123.254
 Default admin username: admin
 Default admin password: password
 Administration: Web-based (LAN)
 Firmware upgradeable: yes
 Misc hardware info
 USB power cable: yes
 Links
 Product page: https://prolink2u.com/

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  User Reviews/Comments:
    rate:
   avg:
by Razi - 2012-08-06 10:43
Hi
wnr1011.
would like to know how to connect to wifi. unable to connect to wifi.
No signal for wifi on the router.
already reset but still can't connect to wifi. Still no display.

Please advice
by anonymous - 2012-12-28 20:44
Hi,

I spent the whole night configuring this 3G mobile WiFi router. Finally got it running and still testing.

I recommend to perform a firmware upgrade, after the upgrade, perform a factory defaults reset. The firmware upgrade took at least 15mins. My first attempt was unsuccessful and only managed to get through after the 2nd attempt. Really needs lots of patience :).

If it still gives me problem, I shall demand to exchange for the TPLink one from SLS and never ever buy any product from Prolink again. In the past, my friend did warn me about getting products from Prolink, I should have listened to his advise.
by anonymous - 2013-05-05 04:47
it just suck !! for 8months it worked fine now it doesn't connect at all.and agent in sri lanka is not good at all when I complained them they just took it and upgraded my software and gave but problem continue .Will never buy again any kind of prolink products .poor customer support.don't spend money on this.It can only connect 3-5 devices max.
by Frustrated User - 2015-07-17 22:46
I totally agree with all of you. Prolink products especially 4G Wireless-N Mobile Router is a piece of junk.
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About