speedguide.net 

Planet WNAP-1260

details: 2.4GHz 802.11n Wall Plug Universal WiFi Repeater
hardware type: Wireless Range Extender
date added: 2012-07-19
updated: 2012-09-03
With the compact-sized and wall plug design, the WNAP-1260 is easy to plug into any electrical outlets of any place for 300Mbps High Speed wireless network sharing. It can operate in various environments by the Hardware Switch Modes including AP, Repeater, and Client, which helps users to immediately set up a wireless network without software configuration.

The WNAP-1260 features 802.11n radio with 2T2R antenna technology compliant with 802.11b/g/n standards. With the 300Mbps High Speed transmitting rates, the WNAP-1260 is easy to integrate the wireless devices with existing wired network.

In order to simplify security settings for home and SOHO network, the WNAP-1260 supports Wi-Fi Protected Setup (WPS) with configuration in PBC and PIN type.

It can operate in various environments with the hardware switch modes including AP, Repeater, and Client, which helps to immediately set up a wireless network without software configuration.

In the Router mode, the WNAP-1260 supports NAT functions allowing multiple users to access Internet via only one single legal IP. It provides Port Forwarding and DMZ for LAN PC to act as an application server. Furthermore, the advanced firewall by the WNAP-1260 can protect your Intranet clients from unauthorized accesses and various DoS attacks from the Internet.
 
 
 
 WNAP-1260 Features
 General
 Availability: currently available
 LAN / WAN Connectivity
 LAN ports: 1
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 UPnP: yes
 Routing Protocols: IGMP Multicast (RFC 1112)
 Wireless
 Maximum Wireless Speed: 300 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
802.11n
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
SSID Broadcast disable
 WiFi modes: Access point
Wireless client
Wireless bridge (PtP)
Multipoint bridge (PtMP)
Repeater mode
 internal antenna(s): 2
 Antenna gain: 2 dBi
 Transmit Power: +14 dBm
 Receiver Sensitivity: -88 dBm
 Multiple SSID: yes
 WDS compatible: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 VPN
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering
 Device Management
 Default IP address: 192.168.1.253
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
 Firmware upgradeable: yes
 Usage Statistics: yes
 Misc hardware info
 NTP client: yes
 Links
 Product page: http://www.planet.com.tw/en/product/prod...
 Datasheet: http://www.planet.com.tw/en/product/imag...
 Manual: http://www.planet.com.tw/en/product/imag...
 Quick Install Guide: http://www.planet.com.tw/en/product/imag...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
print discuss top