It comes with a flying saucer appearance and is compliant with the IEEE 802.3at PoE PD power scheme, thus making deployment easy and mounting to the ceiling and wall of villa and hotel lobbies, exhibition halls and other large rooms flexible.
The WDAP-C7400 supports IEEE 802.11a/b/g/n dual band standards with 3T3R MIMO technology; therefore, it provides the wireless speed up to 450+450Mbps. Moreover, the WDAP-C7400 is equipped with two Gigabit Ethernet ports.
The WDAP-C7400 supports multiple wireless modes including AP, Bridge, Repeater and Universal Repeater for different network applications.
In addition to 64/128-bit WEP encryption, the WDAP-C7400 integrates WPA / WPA2, WPA-PSK / WPA2-PSK and 802.1x Radius authority to secure and protect your wireless LAN. It provides the wireless MAC filtering and SSID broadcast control to consolidate the wireless network security and prevent unauthorized wireless connection.
This AP can create up to 8 virtual standalone APs with 8 different SSIDs in 2.4GHz frequency band, and up to 2 SSIDs in 5GHz frequency band according to individual security levels and encryption scheme of various wireless devices.
| WDAP-C7400 Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 2 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| Wireless | |
| Maximum Wireless Speed: | 900 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode |
| internal antenna(s): | 3 |
| Antenna gain: | 4 dBi |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| Device Management | |
| Default IP address: | 192.168.1.253 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
ping, traceroute |
| Misc hardware info | |
| Max clients: |
20 |
| SNMP support: | SNMP v.2 |
| NTP client: |
|
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | http://www.planet.com.tw/en/product/prod... |
| Datasheet: | http://www.planet.com.tw/en/product/imag... |
| Manual: | http://www.planet.com.tw/en/product/imag... |
| Quick Install Guide: | http://www.planet.com.tw/en/product/imag... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|