| WAP-954NP-C Features |
| General
|
| Availability: |
currently available
|
| LAN / WAN Connectivity
|
| WAN port auto cross-over: |
 |
| LAN ports: |
1 |
| LAN ports type: |
10/100/1000 Gigabit Ethernet (RJ-45)
|
| LAN ports auto cross-over: |
|
| Router
|
| DHCP client: |
|
| QoS: |
|
| Routing Protocols: |
Spanning Tree Protocol (STP)
VLAN tagging (802.1q)
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps
|
| WiFi standards supported: |
802.11b (11 Mbps)
802.11g (54 Mbps)
802.11n
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
Wireless client
Wireless bridge (PtP)
Repeater mode
|
| internal antenna(s): |
1 |
| Antenna gain: |
2 dBi |
| Transmit Power: |
+23 dBm |
| Receiver Sensitivity: |
-70 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| Device Management
|
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
Telnet / CLI
SSH
|
| Firmware upgradeable: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info
|
| Chipset: |
Ralink RT3052F |
| RAM: |
16 Mb |
| Flash Memory: |
4 Mb |
| SNMP support: |
SNMP v.2, SNMP v.3
|
| NTP client: |
|
| Power over Ethernet (PoE): |
|
| Links
|
| Product page: |
http://www.pheenet.com/product/product_i... |
| Datasheet: |
http://www.pheenet.com/spec_upload/WAP-9... |
