A Wi-Fi Extender/APR slide switch allows users to get wireless Internet access easily in different environment.
The WF2416 can be connected to a DSL or cable modem and works as a regular wireless router. Under Wi-Fi Extender mode, it's so easy to setup the wireless extender by pushing the WPS button.
Under WISP mode, the WF2416 is connected wirelessly to an ISP's Wi-Fi Station, acting as a gateway and sharing the Internet access to multiple devices.
| WF2416 Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Repeater mode WISP mode |
| internal antenna(s): | 1 |
| Antenna gain: | 4 dBi |
| Transmit Power: | +20 dBm |
| WPS (Wi-Fi Protected Setup): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Device Management | |
| Default IP address: | 192.168.100.1 |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Links | |
| Product page: | http://www.netis-systems.com/en/products... |
| Datasheet: | http://www.netis-systems.com/Files/other... |
| Quick Install Guide: | http://www.netis-systems.com/Files/other... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|