This access point can act as a DHCP client/ server. It supports Multiple SSIDs and uses WEP and WPA/WPA2 wireless encryption. It uses WMM (QoS) to prioritize the traffic over the network. Using Wi-Fi Multimedia Power Save (WMM-PS, a.k.a., Unscheduled Automatic Power Save Delivery (u-APSD)) this AP saves up to 40% of the battery life of WMM-PS devices connected to the AP.
The WNDAP350 can be easily configured via Web-based configuration utility, including a Quick Setup Wizard or via SNMP v.1/ v.2.
| WNDAP350 Features | |
| General | |
| Availability: | currently available |
| Street price: |
$279 |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP server: |
|
| DHCP client: |
|
| QoS: |
|
| Routing Protocols: | VLAN tagging (802.1q) |
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (draft 2.0) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode |
| external antenna(s): | 2 |
| Antenna connector: | RP-SMA (Reverse SMA) |
| Transmit Power: | +20 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| WMM-PS (QoS): |
|
| Dual Band (2.4GHz/5GHz): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Device Management | |
| Default IP address: | 192.168.0.237 |
| Default admin username: | admin |
| Default admin password: | password |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard Telnet / CLI SSH SSL secure web |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info | |
| RAM: | 128 Mb |
| Flash Memory: | 16 Mb |
| Max clients: |
64 |
| SNMP support: | SNMP v.1, SNMP v.2 |
| NTP client: |
|
| Power over Ethernet (PoE): |
|
| Links | |
| Product page: | http://www.netgear.com/business/products... |
| Datasheet: | http://www.downloads.netgear.com/files/G... |
| Manual: | ftp://downloads.netgear.com/files/WNDAP3... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|