This access point can act as a DHCP client. It supports WEP and WPA/WPA2 wireless encryption and uses WMM (QoS) to prioritize the traffic over the network.
The WG602 provides VPN pass-through for IPSec and L2TP. It can be easily configured via Web-based configuration utility.
| WG602 Features | |
| General | |
| Availability: | discontinued |
| List price: | $59 |
| Street price: |
$62 |
| Warranty: | 3 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP client: |
|
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Antenna gain: | 2 dBi |
| Transmit Power: | +16 dBm |
| WMM (QoS): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Device Management | |
| Default IP address: | 192.168.0.227 |
| Default admin username: | admin |
| Default admin password: | password |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Misc hardware info | |
| Chipset: | Broadcom5354, 240MHz |
| RAM: | 8 Mb |
| Flash Memory: | 2 Mb |
| Third-party firmware support: |
DD-WRT |
| Notes: | v.3.0 has 8Mb RAM, 2 Mb flash memory. |
| Links | |
| Product page: | http://support.netgear.com/product/WG602... |
| Datasheet: | http://www.downloads.netgear.com/files/G... |
| Manual: | http://www.downloads.netgear.com/files/w... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|