The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

Netgear WG302

details: ProSafe 802.11g Wireless Access Point
hardware type: Wireless Access Point
date added: 2009-12-30
updated: 2015-09-17
The WG302 is an 802.11b/g wireless access point with a single 10/100Base-T LAN port. It can operate in AP, bridge and repeater modes. It supports simultaneous wireless bridge and access point mode. Using the "Turbo-G" technology, it provides wireless transmission speeds of up to 125Mbps.

This access point can act as a DHCP server. It supports WEP and WPA/WPA2 wireless encryption and uses WMM (QoS) to prioritize the traffic over the network.

The WG302 supports SpectraLink Voice Priority. SpectraLink allows organizations to provide voice priority mechanisms on their wireless network.

Integrated IEEE 802.3af-based Power over Ethernet (PoE) support eliminates extra cables and the need to locate near a power outlet, as the access point is powered over the Ethernet cable
 
 
 
 WG302 Features
 General
 Availability: currently available
 List price: $179
 Street price: $159
 LAN / WAN Connectivity
 WAN ports: 0
 LAN ports: 1
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Serial port: yes
RS-232C interface with DB-9 male connector
 Router
 DHCP server: yes
 DHCP client: yes
 QoS: yes
 Routing Protocols: VLAN tagging (802.1q)
 Wireless
 Maximum Wireless Speed: 108 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
802.11g+ (108 Mbps+)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
Wireless bridge (PtP)
Multipoint bridge (PtMP)
Repeater mode
 external antenna(s): 2
 ext antenna(s) removable ?: yes
 Antenna connector: RP-SMA (Reverse SMA)
 Antenna gain: 5 dBi
 Transmit Power: +19 dBm
 Receiver Sensitivity: -75 dBm
 WDS compatible: yes
 WMM (QoS): yes
 VPN
  IPSec
 IPSec passthrough: yes
  PPTP
 PPTP passthrough: yes
 Device Management
 Default IP address: 192.168.0.228
 Default admin username: admin
 Default admin password: password
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
Telnet / CLI
SSH
SSL secure web
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Misc hardware info
 Chipset: IXP420, 266MHz
 RAM: 16 Mb
 Flash Memory: 8 Mb
 SNMP support: SNMP v.1, SNMP v.2
 Power over Ethernet (PoE): yes
 Third-party firmware support: yes
DD-WRT
 Notes: v.1.0 has 16Mb RAM, 8Mb flash memory.
 Links
 Product page: http://support.netgear.com/product/WG302...
 Datasheet: http://www.downloads.netgear.com/files/G...
 Manual: http://www.downloads.netgear.com/files/W...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About