The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

Netgear WG102

details: ProSafe 802.11g Wireless Access Point
hardware type: Wireless Access Point
date added: 2010-01-17
updated: 2013-04-16
The WG102 is an 802.11b/g wireless access point with a single 10/100Base-T LAN port. It can operate in AP, Wireless Bridge, Wireless Client and Repeater modes. This AP integrates 802.3af Power Over Ethernet (PoE) function. It uses "Super-G" mode- a proprietary extension to the 802.11g standard, which can double the throughput to 108Mbps. Only compatible wireless stations can use this mode.

This access point can act as a DHCP client. It supports WEP and WPA/WPA2 wireless encryption and 802.1x authentication. It uses WMM (QoS) to prioritize the traffic over the network.

The WG102 can be easily configured via Web-based configuration utility, including a Quick Setup Wizard or via SNMP v.2.
 
 
 
 WG102 Features
 General
 Availability: discontinued
 List price: $129
 Street price: $120
 LAN / WAN Connectivity
 WAN ports: 0
 LAN ports: 1
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 DHCP client: yes
 Routing Protocols: VLAN tagging (802.1q)
 Wireless
 Maximum Wireless Speed: 108 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
802.11g+ (108 Mbps+)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
Wireless client
Wireless bridge (PtP)
Multipoint bridge (PtMP)
Repeater mode
 external antenna(s): 1
 ext antenna(s) removable ?: yes
 Antenna connector: RP-SMA (Reverse SMA)
 Antenna gain: 5 dBi
 Transmit Power: +16 dBm
 Receiver Sensitivity: -73 dBm
 Default SSID: NETGEAR-0-0
 Multiple SSID: yes
 WDS compatible: yes
 WMM (QoS): yes
 VPN
  IPSec
 IPSec passthrough: yes
  PPTP
 PPTP passthrough: yes
 Device Management
 Default IP address: 192.168.0.229
 Default admin username: admin
 Default admin password: password
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Misc hardware info
 SNMP support: SNMP v.2
 NTP client: yes
 Power over Ethernet (PoE): yes
 Links
 Product page: http://support.netgear.com/product/WG102
 Manual: ftp://downloads.netgear.com/files/wg102_...
 Quick Install Guide: ftp://downloads.netgear.com/files/wg102_...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About