The integrated wireless access point complies with the IEEE 802.11n (draft 2.0) standard, providing wireless transmission rates of up to 300Mbps. This AP supports Multiple SSIDs and WEP and WPA2 wireless encryption. It uses WMM (QoS) to prioritize the traffic over the network. A WPS button allows for worry-free wireless security configuration.
This router supports a variety of VoIP features, such as Caller ID, Echo Cancellation and 3- way conferencing.
The router provides VPN pass-through for IPSec, L2TP and PPTP. A built-in SPI firewall protects the network against malicious attacks. It can be configured via Web-based configuration utility or via Telnet/CLI.
| EVG2000 Features | |
| General | |
| Availability: | discontinued |
| Warranty: | 1 year(s) |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | Gigabit Ethernet (RJ-45) |
| LAN ports: | 4 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| USB port(s): |
2 for SAMBA File Service to USB Memory or Hard Drives |
| USB port type: | USB 2.0 |
| RJ-11 FXS VoIP phone ports: | 2 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| UPnP: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) BGP (RFC 1771) VLAN tagging (802.1q) IGMP Multicast (RFC 1112) RTSP Real-time streaming (RFC 2326) |
| DSL | |
| PPPoE client: |
|
| VoIP | |
| VoIP Protocols: | RTP / RTCP (RFCs 1889/1890) |
| VoIP Audio Codecs: |
G.711 (PCM) G.723.1 G.726 G.729 (a/b) |
| VoIP Voice Features: |
Echo Cancellation (G.165/G.168) Adaptive Jitter Buffer 3-way conferencing Caller ID Call transfer Call forward Speed Dialing Voice Activity Detection (VAD) Voicemail |
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft 2.0) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) |
| WiFi modes: | Access point |
| Multiple SSID: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| Device Management | |
| Administration: |
Web-based (LAN) Remote configuration (WAN) Quick Setup Wizard Telnet / CLI |
| Firmware upgradeable: |
|
| Email alerts: |
|
| Event log: |
|
| Misc hardware info | |
| Max clients: |
253 |
| SNMP support: | SNMP v.2 |
| NTP client: |
|
| Links | |
| Product page: | http://netgear.com/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
User Reviews/Comments:
rate:
avg:
by
jglliu - 2011-03-04 03:07
I am using Netgear EVG2000, but my computers are Macs. I do not know how to switch off the wireless function of the Router?
Could you tell me how to do it. Thanks! |
|
|