The Broadband Guide
SG
search advanced

NetComm NB7Plus4W

details: ADSL2+ Modem Router with 4 Ethernet Ports and 802.11g Wireless AP
hardware type: DSL Wireless Router
date added: 2010-02-04
updated: 2013-04-15
The NB7Plus4W is a wireless ADSL2+ router with one RJ-11 WAN port and four 10/100Base-T LAN ports. It provides WAN throughput of up to 30Mbps.

The integrated access point complies with IEEE 802.11b/g standards. It is WDS compatible and supports WEP and WPA/WPA2 wireless encryption.

This router provides VPN pass-through for IPSec and PPTP. It features a built-in SPI firewall to protect the network from hackers and Denial of Service (DoS) attacks.
 
 
 
 NB7Plus4W Features
 General
 Availability: discontinued
 LAN / WAN Connectivity
 WAN throughput: 30 Mbps
 WAN throughput upstream: 3 Mbps
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port forwarding of ranges: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 Transparent Bridging (IEEE 802.1d): yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
ADSL2+M (G.992.5 Annex M)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
SSID Broadcast disable
 WiFi modes: Access point
Repeater mode
 internal antenna(s): 1
 external antenna(s): 1
 Transmit Power: +15 dBm
 WDS compatible: yes
 VPN
  IPSec
 IPSec passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: IP Address filtering, packet filtering
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Quick Setup Wizard
Telnet / CLI
TFTP (RFC 1350)
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
 Misc hardware info
 Chipset: Broadcom BCM6338
 RAM: 8 Mb
 Flash Memory: 2 Mb
 Links
 Product page: http://support.netcommwireless.com/produ...
 Datasheet: http://www.netcomm.com.au/__data/assets/...
 Manual: http://www.netcomm.com.au/__data/assets/...
 Quick Install Guide: http://www.netcomm.com.au/__data/assets/...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About