| Broadband Hardware |
The ADSL2+ Wireless N300 Router lets you create a high-performance Wi-Fi hotspot with Wireless N networking speeds of up to 300Mbps, and connects up to four wired devices via the in-built Ethernet ports. The router supports the next generation of Internet Protocol version 6 (IPv6) addressing. Users can share access to an external hard drive by using the USB port. The router includes a WPS push button that allows for easy set-up of wireless network, a push button to easily turn wireless signal on and off, advanced security options to ensure the network remains safe and an easy to navigate web interface if you need to change any settings. |
click image to enlarge |
||||||||
|
|
|||||||||
| NB304N Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| USB port(s): |
1 for storage devices |
| USB port type: | USB 2.0 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Transparent Bridging (IEEE 802.1d): |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389) |
| DSL | |
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) RE-ADSL2 (G.992.3 Annex L) ADSL2+ (G.992.5) |
| PPPoE client: |
|
| PPPoA client: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps |
| WiFi standards supported: |
802.11b (11 Mbps) 802.11g (54 Mbps) 802.11n (draft 2.0) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) |
| WiFi modes: | Access point |
| external antenna(s): | 2 |
| ext antenna(s) removable ?: |
 |
| Antenna gain: | 2 dBi |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) TFTP (RFC 1350) |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Diagnostic functions: |
|
| Misc hardware info | |
| IPv6 support: |
|
| NTP client: |
|
| Links | |
| Product page: | http://www.netcommwireless.com/product/x... |
| Manual: | http://media.netcomm.com.au/public/asset... |
| Quick Install Guide: | http://media.netcomm.com.au/public/asset... |
| Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please |
|
No user reviews/comments yet
rate:
avg:
|
|
|