The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

NetComm NB304N

details: ADSL2+ Wireless N300 Router
hardware type: DSL Wireless Router
date added: 2012-07-10
updated: 2013-04-15
The ADSL2+ Wireless N300 Router lets you create a high-performance Wi-Fi hotspot with Wireless N networking speeds of up to 300Mbps, and connects up to four wired devices via the in-built Ethernet ports.

The router supports the next generation of Internet Protocol version 6 (IPv6) addressing. Users can share access to an external hard drive by using the USB port.

The router includes a WPS push button that allows for easy set-up of wireless network, a push button to easily turn wireless signal on and off, advanced security options to ensure the network remains safe and an easy to navigate web interface if you need to change any settings.
 
 
 
 NB304N Features
 General
 Availability: currently available
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: DSL/ISDN/POTS connector (RJ-11)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 USB port(s): 1
for storage devices
 USB port type: USB 2.0
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 Transparent Bridging (IEEE 802.1d): yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
 DSL
 DSL compliance: ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413)
ADSL2 (G.992.3, G.lite.bis 992.4)
RE-ADSL2 (G.992.3 Annex L)
ADSL2+ (G.992.5)
 PPPoE client: yes
 PPPoA client: yes
 Wireless
 Maximum Wireless Speed: 300 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
802.11n (draft 2.0)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
 WiFi modes: Access point
 external antenna(s): 2
 ext antenna(s) removable ?: no
 Antenna gain: 2 dBi
 Multiple SSID: yes
 WDS compatible: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
TFTP (RFC 1350)
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Diagnostic functions: yes
 Misc hardware info
 IPv6 support: yes
 NTP client: yes
 Links
 Product page: http://www.netcommwireless.com/product/x...
 Manual: http://media.netcomm.com.au/public/asset...
 Quick Install Guide: http://media.netcomm.com.au/public/asset...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About