Create an instant high speed WiFi zone for multiple devices from public areas using a 3G/4G USB modem, or connect to an ADSL2+ service via the Ethernet port and with a host of advanced security features your devices will benefit from maximum wireless protection. The device features 1 x 10/100/1000 Mbps switchable WAN/LAN port.
This router creates an instant dual band WiFi hotspot for users to connect to. The latest AC WiFi technology is supported on the 5GHz frequency for prioritising high speed traffic and WiFi N is supported on the 2.4GHz frequency.
| 4GM3W Features | |
| General | |
| Availability: | currently available |
| Street price: |
$97 |
| LAN / WAN Connectivity | |
| WAN ports: |
0 one USB port for 3G/4G connection |
| LAN ports: | 1 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| USB port(s): |
1 for 3G/4G USB connection and storage devices |
| USB port type: | USB 2.0 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| Wireless | |
| Maximum Wireless Speed: | 750 Mbps (Wi-Fi 5) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) 802.11ac (Wi-Fi 5) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: | Access point |
| internal antenna(s): | 3 |
| WDS compatible: |
|
| WPS (Wi-Fi Protected Setup): |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| Firewall | |
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering |
| Device Management | |
| Default IP address: | 192.168.20.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| IPv6 support: |
|
| NTP client: |
|
| Links | |
| Product page: | http://www.netcommwireless.com/product/3... |
| Datasheet: | http://media.netcomm.com.au/public/asset... |
| Manual: | http://media.netcomm.com.au/public/asset... |
| Quick Install Guide: | http://media.netcomm.com.au/public/asset... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|