| 3GM2WN Features |
| General
|
| Availability: |
currently available
|
| LAN / WAN Connectivity
|
| WAN ports: |
0 one USB port for 3G/4G USB modem |
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
|
| USB port(s): |
1 for 3G/4G USB modem |
| USB port type: |
USB 2.0
|
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| DHCP client: |
|
| UPnP: |
|
| Routing Protocols: |
RIP v1 (static routing, RFC 1058) RIP v2 (dynamic routing, RFC1389)
|
| Wireless
|
| Maximum Wireless Speed: |
150 Mbps
|
| WiFi standards supported: |
802.11b (11 Mbps) 802.11g (54 Mbps) 802.11n (draft)
|
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) SSID Broadcast disable
|
| WiFi modes: |
Access point
|
| WDS compatible: |
|
| WPS (Wi-Fi Protected Setup): |
|
| Firewall
|
| DoS / DDoS protection: |
|
| Filtering: |
Domain/URL blocking, IP Address filtering, MAC Address filtering
|
| Device Management
|
| Default IP address: |
192.168.20.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN) Remote configuration (WAN)
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Links
|
| Product page: |
http://www.netcommwireless.com/product/4... |
| Datasheet: |
http://media.netcomm.com.au/public/asset... |
| Manual: |
http://media.netcomm.com.au/public/asset... |
| Quick Install Guide: |
http://media.netcomm.com.au/public/asset... |