This simple setup device lets you create and share a high-speed 300Mbps wireless network between multiple users, and connects up to 4 wired devices using the Ethernet ports.
Everyone on the network can access a printer or storage device via the USB port while benefiting from maximum network protection with a raft of security features including an advanced firewall, VPN pass-through functionality and encrypted Point-to-Point communications from connected computers.
| 3G29WN2 Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN throughput: |
24 Mbps |
| WAN ports: |
1 one SIM card slot |
| WAN port(s) type: | DSL/ISDN/POTS connector (RJ-11) |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| USB port(s): |
1 for printers and storage devices |
| USB port type: | USB 2.0 |
| Auto-failover connection: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| DNS proxy: |
|
| Dynamic DNS client: |
|
| DSL | |
| DSL compliance: |
ADSL1 (G.dmt 992.1, G.lite 992.2, G.hs 994.1, DMT T1.413) ADSL2 (G.992.3, G.lite.bis 992.4) ADSL2+ (G.992.5) |
| PPPoE client: |
|
| PPPoA client: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) |
| WiFi modes: | Access point |
| external antenna(s): | 3 |
| 3G UMTS HSPA: | UTMS/HSDPA/HSUPA |
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| L2TP | |
| L2TP passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | packet filtering |
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Telnet / CLI TFTP (RFC 1350) |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| NTP client: |
|
| Print Server: |
|
| Links | |
| Product page: | http://www.netcommwireless.com/product/3... |
| Manual: | http://media.netcomm.com.au/public/asset... |
| Quick Install Guide: | http://media.netcomm.com.au/public/asset... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|