The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

NetComm 3G18Wn

details: 3G Wireless N300 Router
hardware type: Travel Router
date added: 2010-06-07
updated: 2013-04-11
The NetComm 3G18Wn 3G Wireless Router allows you to share your 3G service with any wireless enabled desktop or laptop computers. Using a 3G USB modem you can now set up a wireless network to share internet access in areas where previously unavailable.

This router is compatible with all 3G/Next GTM/UMTS/ HSPA/ EV-DO/ USB modems.

The integrated AP complies with IEEE 802.11n standard, providing wireless transmission speeds of up to 300Mbps. It supports WEP and WPA/WPA2 wireless encryption and uses WMM (QoS) to prioritize the traffic over the network.

The router provides VPN pass-through for IPSec and PPTP. It features a built-in SPI firewall to protect the network against hackers and Denial of Service (DoS) attacks.
 
 
 
 3G18Wn Features
 General
 Availability: discontinued
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: 10/100 Base-TX (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 USB port(s): 1
for 3G USB modem
 USB port type: USB 2.0
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 MAC Address clone: yes
 Wireless
 Maximum Wireless Speed: 300 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
802.11n (draft 2.0)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
Wireless MAC Address filtering
 WiFi modes: Access point
 external antenna(s): 2
 Antenna gain: 3 dBi
 Transmit Power: +16 dBm
 Multiple SSID: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 VPN
  IPSec
 IPSec passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering
 Device Management
 Default IP address: 192.168.20.1
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Event log: yes
 Usage Statistics: yes
 Misc hardware info
 RAM: 16 Mb
 Flash Memory: 4 Mb
 NTP client: yes
 Links
 Product page: http://www.netcommwireless.com/product/3...
 Datasheet: http://media.netcomm.com.au/public/asset...
 Manual: http://media.netcomm.com.au/public/asset...
 Quick Install Guide: http://media.netcomm.com.au/public/asset...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About