This router is compatible with all 3G/Next GTM/UMTS/ HSPA/ EV-DO/ USB modems. It ensures connectivity and business continuity with auto Internet failover from WAN port to 3G USB modem.
The integrated AP complies with IEEE 802.11n (draft) standard, providing wireless transmission speeds of up to 150Mbps. It supports WEP and WPA/WPA2 wireless encryption and uses WMM (QoS) to prioritize the traffic over the network.
The router provides VPN pass-through for IPSec and PPTP. It features a built-in SPI firewall to protect the network against hackers and Denial of Service (DoS) attacks.
| 3G17Wn Features | |
| General | |
| Availability: | currently available |
| Street price: |
$143 |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 2 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| USB port(s): |
1 for 3G USB modem |
| USB port type: | USB 2.0 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| MAC Address clone: |
|
| Wireless | |
| Maximum Wireless Speed: | 150 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (draft) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering |
| WiFi modes: | Access point |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Antenna connector: | RP-SMA (Reverse SMA) |
| Antenna gain: | 2 dBi |
| Multiple SSID: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| VPN | |
| IPSec | |
| IPSec passthrough: |
|
| PPTP | |
| PPTP passthrough: |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Filtering: | Domain/URL blocking, IP Address filtering, MAC Address filtering, keyword/content filtering |
| Device Management | |
| Default IP address: | 192.168.20.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info | |
| RAM: | 32 Mb |
| Flash Memory: | 8 Mb |
| NTP client: |
|
| Links | |
| Product page: | http://www.netcomm.com.au/netcomm-produc... |
| Datasheet: | http://media.netcomm.com.au/public/asset... |
| Manual: | http://media.netcomm.com.au/public/asset... |
| Quick Install Guide: | http://media.netcomm.com.au/public/asset... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|