speedguide.net  

NetComm 3G10WVT

details: Telstra Turbo 7 Wireless Gateway
hardware type: Wireless Router
date added: 2011-05-10
updated: 2020-03-22
Utilizing the coverage and speed of the Telstra Next G network, the Turbo 7 Wireless Gateway enables you to set up and share your Next G connection with multiple wireless and wired devices, without the need for a fixed line Internet connection. This device incorporates 2 removable antennas, 2 Ethernet ports for wired connectivity, 54Mbps/11g wireless, voice calls over the Next G network and one USB 2.0 port.

You can share a single connection with up to 20 wireless and wired devices including PC's, notebooks, Wi-Fi phones and PDAs. Teleworkers can communicate by connecting a standard PSTN telephone to the gateway's telephone port.

The device provides VPN pass-through for IPSec, L2TP and PPTP. A built-in SPI firewall protects the network against Denial of Service (DoS) attacks.
 
 
 
 3G10WVT Features
 General
 Availability: discontinued
 LAN / WAN Connectivity
 WAN ports: 1
one USIM slot for SIM card
 LAN ports: 2
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 USB port(s): 1
for printers and storage devices
 USB port type: USB 2.0
 RJ-11 FXO VoIP PSTN wall jack port: 1
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 DNS proxy: yes
 Dynamic DNS client: yes
 UPnP: yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
 WiFi modes: Access point
 external antenna(s): 3
 ext antenna(s) removable ?: yes
 VPN
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Filtering: IP Address filtering, MAC Address filtering, packet filtering
 Device Management
 Default IP address: 10.0.0.138
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Telnet / CLI
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
ping
 Misc hardware info
 SNMP support: SNMP v.2
 NTP client: yes
 Print Server: yes
 Links
 Product page: https://www.netcomm.com/
 Datasheet: http://media.netcomm.com.au/public/asset...
 Manual: http://media.netcomm.com.au/public/asset...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About