The device can work in the following operating modes: Access Point, Wireless Bridge, Wireless Client, WISP, Gateway.
The LP-9096 features a WPS hardware button. It supports WEP/WPA2 wireless encryption for secure wireless connections and is WDS compatible.
| LP-9096 Features | |
| General | |
| Availability: | currently available |
| LAN / WAN Connectivity | |
| WAN ports: |
1 |
| WAN port(s) type: | 10/100 Base-TX (RJ-45) |
| WAN port auto cross-over: |
 |
| LAN ports: | 4 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
|
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| Wireless | |
| Maximum Wireless Speed: | 1200 Mbps (Wi-Fi 5) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) 802.11ac (Wi-Fi 5) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) WISP mode |
| external antenna(s): | 3 |
| Antenna gain: | 7 dBi |
| Transmit Power: | +21 dBm |
| Receiver Sensitivity: | -90 dBm |
| WDS compatible: |
|
| WPS (Wi-Fi Protected Setup): |
|
| Dual Band (2.4GHz/5GHz): |
|
| Simultaneous Dual Band (2.4GHz/5GHz): |
|
| Device Management | |
| Default IP address: | 192.168.1.254 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: | Web-based (LAN) |
| Firmware upgradeable: |
|
| Misc hardware info | |
| Chipset: | Realtek RTL8197D |
| Links | |
| Product page: | http://www.loopcomm.com/front/bin/ptdeta... |
| Datasheet: | http://www.loopcomm.com/ezcatfiles/loopc... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|