speedguide.net  

Loopcomm LP-8096

details: High Power Dual Band Concurrent AP Router
hardware type: Wireless Router
date added: 2014-05-29
updated: 2014-06-01
The LP-8096 is a simultaneous dual band wireless router that complies with IEEE 802.11a/b/g/n/ac standards and supports up to 867Mbps + 300Mbps wireless speed. It router features one USB port for storage devices.

The device can work in the following operating modes: Access Point, Wireless Bridge, Wireless Client, WISP, Gateway.

The LP-8096 features a WPS hardware button. It supports WEP/WPA2 wireless encryption for secure wireless connections. WMM (QoS) prioritizes the traffic over the network.
 
 
 
 LP-8096 Features
 General
 Availability: currently available
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: Gigabit Ethernet (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 4
 LAN ports type: Gigabit Ethernet (RJ-45)
 LAN ports auto cross-over: yes
 USB port(s): 1
for storage devices
 USB port type: USB 2.0
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 Routing Protocols: VLAN tagging (802.1q)
 Wireless
 Maximum Wireless Speed: 1200 Mbps (Wi-Fi 5)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
802.11ac (Wi-Fi 5)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
Wireless client
Wireless bridge (PtP)
WISP mode
 external antenna(s): 2
 ext antenna(s) removable ?: yes
 Antenna connector: RP-SMA (Reverse SMA)
 Antenna gain: 5 dBi
 Transmit Power: +15 dBm
 Receiver Sensitivity: -90 dBm
 WDS compatible: yes
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 Dual Band (2.4GHz/5GHz): yes
 Simultaneous Dual Band (2.4GHz/5GHz): yes
 VPN
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering
 Device Management
 Default IP address: 192.168.3.1
 Alternate Admin URL: http://setup.loopcomm.com
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Misc hardware info
 NTP client: yes
 Links
 Product page: http://www.loopcomm.com/front/bin/ptdeta...
 Datasheet: http://www.loopcomm.com/ezcatfiles/loopc...
 Manual: http://www.loopcomm.com/ezcatfiles/loopc...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About