This access point has two LAN ports, and two embedded antennas. It supports WEP and WPA/ WPA2 wireless encryption to help prevent unauthorized access to the network.
The web-based management interface allows for easy user configuration.
| LCS-WA3-50 Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 2 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP server: |
|
| DHCP client: |
|
| MAC Address clone: |
|
| Wireless | |
| Maximum Wireless Speed: | 300 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Multipoint bridge (PtMP) Repeater mode |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
 |
| Antenna gain: | 2 dBi |
| Transmit Power: | +14 dBm |
| Receiver Sensitivity: | -73 dBm |
| WDS compatible: |
|
| WMM (QoS): |
|
| WPS (Wi-Fi Protected Setup): |
|
| Device Management | |
| Default IP address: | 192.168.1.254 |
| Default admin username: | n/a |
| Default admin password: | n/a |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info | |
| NTP client: |
|
| USB power cable: |
|
| Links | |
| Product page: | https://www.longshine.de/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|