The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

Linksys WRV200

details: Wireless-G VPN Router with RangeBooster
hardware type: Wireless Router
date added: 2007-09-25
updated: 2015-02-11
The Linksys Small Business Series is the affordable, reliable, high quality networking solution that helps you do business smarter. Secure and easy to install and maintain, it's built to grow with your business.

Enable a wireless network in a reliable, intelligent and SNMP managed way for your small business. The intuitive webbased interface allows you to easily set up the features of the WRV200. SNMP gives you the ability to remotely manage and monitor the device.

The VPN router gives your business multiple SSID and VLANs for traffic separation and enhanced QOS funtionality for improved quality voice/video. With support for Wireless QoS (WMM) and wired QoS (port prioritization), consistent voice and video quality is maintained throughout your business.
 
 
 
 WRV200 Features
 General
 Availability: discontinued
 Street price: $72
 Warranty: 3 year(s)
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: 10/100 Base-TX (RJ-45)
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 USB port(s): 0
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port forwarding of ranges: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 DNS proxy: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 MAC Address clone: yes
 MTU configurable (WAN): yes
 MTU limit (WAN): 1500
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
 DSL
 PPPoE client: yes
 Wireless
 Maximum Wireless Speed: 54 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
802.11g MIMO (extended range)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
RADIUS authentication
Wireless MAC Address filtering
SSID Broadcast disable
 WiFi modes: Access point
Repeater mode
 internal antenna(s): 0
 external antenna(s): 2
 Antenna gain: 2 dBi
 Transmit Power: +11 dBm
 Receiver Sensitivity: 11 dBm
 Default SSID: linksys
 Multiple SSID: yes
 WDS compatible: yes
 WMM (QoS): yes
 VPN
 VPN Authentication: MD5 (128-bit), SHA1 (160-bit)
 VPN Encryption: 3DES (168-bit), AES (128-bit)
 RADIUS support: yes
  IPSec
 IPSec client: yes
 IPSec passthrough: yes
 IPSec simultaneous tunnels: 10
 IPSec throughput: 30 Mbps
  L2TP
 L2TP server: yes
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Security log: yes
 Filtering: Domain/URL blocking, IP Address filtering, MAC Address filtering, date/time scheduling, Proxy, Java, ActiveX, Cookie
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: admin
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
TFTP (RFC 1350)
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Diagnostic functions: yes
 Misc hardware info
 SNMP support: SNMP v.1, SNMP v.2
 Links
 Product page: http://www.cisco.com/en/US/products/ps99...
 Datasheet: http://www.cisco.com/en/US/prod/collater...
 Manual: http://www.cisco.com/en/US/docs/routers/...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  User Reviews/Comments:
    rate:
   avg:
by piter - 2007-10-09 06:58
We have very nice VPN for a very low price, but this router has many bugs.
First The QoS in this router is a joke. It`s not working as It suppose to work, maybe the port base QoS will work, I haven`t checked it yet, but the percent QoS is not working. Second the big problem is with stop working FTP,ICQ and few other protocols. With a non official firmware 1.34 we can do port triggering for example, we need to say that port 21 FTP is port 21 FTP, and then It starts to work, but this is not the way it should be. The GUI sometimes is not responding. We can see the white page, and that`s all. Of course, after restart everything is all right, but imagine, that this is our branch router, and we are for example 1000 miles from there and we have VPN connection(which is working very nice what I said before), and we need to change few things. GUI is not responding, and we have a big problem.
If you want just only VPN connection, it`s good, but if you want it for few other functions in your network, I can say that we can buy sth better for this price.
by Cools - 2007-12-11 04:19
I have on of these, with lateist FW and its utter CRAP.
Dont get one... get something better..

Like a netgear or dlink, not this waste of space..
by anonymous - 2008-04-29 20:47
I agree stay away from this thing, I have had nothing but trouble with it.
by anonymous - 2008-07-15 04:23
Just a piece of crap, I have 3 of these, sent back to our supplier, support 5 VLANs ? s&%t, waste of time, stay away from this router
by Lijo john - 2009-02-27 12:29
Hi everyone,
I have a big network setup using this router, working great!!
It is reliable (working for years without any problem)
Even qucik VPN is working nice (on Windows XP only, I have a problem with Vista).
You need to setup correctly for QOS to work, it's working for me.
by xtassy - 2011-10-28 10:27
This was my last Lynksys router or any product they make !!!! always problems ! what a crap! Don't waste your time with this product.
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About