The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

Linksys WRT600N

details: Dual-Band Wireless-N Gigabit Router with Storage Link
hardware type: Wireless Router
date added: 2007-10-25
updated: 2013-04-30
The Dual-Band Wireless-N Gigabit Router is really four devices in one box. First, there's the dual-band Wireless Access Point, which lets you connect to the network without wires. There's also a built-in 4-port full-duplex 10/100/1000 Switch to connect your wired-Ethernet devices together at up to gigabit speeds. The Router function ties it all together and lets your whole network share a high-speed cable or DSL Internet connection.

Features:
Built-in Storage Link, transform any USB storage device into a NAS
Built-in Media Server, streams music, video, and photos to any UPnP compatible media adapter.
All ports support Gigabit speed and Auto-Crossover (MDI/MDI-X) -- no need for crossover cables
MIMO technology uses multiple radios to create a robust signal that travels farther and faster, with reduced dead spots.
Compatible with Wireless-A (802.11a), Wireless-B (802.11b) and Wireless-G (802.11g) Standards
 
 
 
 WRT600N Features
 General
 Availability: discontinued
 Release Date: 2007-10-23
 Street price: $234
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: 10/100/1000 Gigabit Ethernet (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 4
 LAN ports type: 10/100/1000 Gigabit Ethernet (RJ-45)
 LAN ports auto cross-over: yes
 USB port(s): 1
flash drive, hard drive
 USB port type: USB 2.0
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port forwarding of ranges: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 Wireless
 Maximum Wireless Speed: 300 Mbps
 WiFi standards supported: 802.11a (54 Mbps)
802.11b (11 Mbps)
802.11g (54 Mbps)
802.11n (draft)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
 WiFi modes: Access point
 internal antenna(s): 0
 external antenna(s): 3
 Antenna gain: 3 dBi
 Transmit Power: +16 dBm
 Receiver Sensitivity: -80 dBm
 WDS compatible: yes
 WMM (QoS): yes
 Dual Band (2.4GHz/5GHz): yes
 VPN
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: (blank)
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Configuration backup/restore: yes
 Event log: yes
 Diagnostic functions: yes
ping, traceroute
 Misc hardware info
 Chipset: Broadcom4785 300MHz
 RAM: 32 Mb
 Flash Memory: 8 Mb
 Third-party firmware support: yes
DD-WRT
 Notes: v.1.0 has 32Mb RAM, 8Mb flash memory.
 Links
 Product page: http://homesupport.cisco.com/en-us/wirel...
 Datasheet: http://homedownloads.cisco.com/downloads...
 Manual: http://homedownloads.cisco.com/downloads...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About