| WRT54GP2A-AT Features |
| General
|
| Availability: |
discontinued
|
| Street price: |
$163
|
| LAN / WAN Connectivity
|
| WAN ports: |
1
|
| WAN port(s) type: |
10/100 Base-TX (RJ-45)
|
| WAN port auto cross-over: |
 |
| LAN ports: |
4 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
|
| RJ-11 FXS VoIP phone ports: |
2 |
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| DMZ: |
|
| Port forwarding: |
|
| Port forwarding of ranges: |
|
| Port triggering: |
|
| DHCP server: |
|
| DHCP client: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| UPnP: |
|
| MAC Address clone: |
|
| VoIP
|
| VoIP Protocols: |
SIP v2 (RFC 3261)
|
| VoIP Audio Codecs: |
G.711 (PCM)
G.723.1
G.726
G.729 (a/b)
|
| VoIP Voice Features: |
Caller ID
Call waiting
Call forward
Voicemail
|
| Wireless
|
| Maximum Wireless Speed: |
54 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
|
| external antenna(s): |
2 |
| Transmit Power: |
+15 dBm |
| Default SSID: |
linksys |
| VPN
|
| |
IPSec |
| IPSec passthrough: |
|
| |
L2TP |
| L2TP passthrough: |
|
| |
PPTP |
| PPTP passthrough: |
|
| Firewall
|
| SPI firewall: |
|
| Filtering: |
Domain/URL blocking, MAC Address filtering
|
| Device Management
|
| Default IP address: |
192.168.15.1 |
| Default admin username: |
(blank) |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Diagnostic functions: |
ping, traceroute |
| Misc hardware info
|
| Chipset: |
IXP425, 400Mhz |
| RAM: |
32 Mb |
| Flash Memory: |
8 Mb |
| NTP client: |
|
| Third-party firmware support: |
DD-WRT |
| Links
|
| Datasheet: |
http://homedownloads.cisco.com/downloads... |
| Manual: |
http://homedownloads.cisco.com/downloads... |
| Quick Install Guide: |
http://homedownloads.cisco.com/downloads... |
