The Broadband Guide
SG
search advanced
 Username:
 Password:
Register
 forgot password?

Linksys WRT160N

details: Wireless-N Broadband Router
hardware type: Wireless Router
date added: 2009-08-02
updated: 2015-02-11
The WRT160N supports wireless-n technology to deliver high speeds and coverage. It uses Wireless-N's Multiple in, Multiple Out MIMO technology to boost range and reduce dead spots. It does not have dual band (2.5ghz / 5 ghz) support as some higher end Wireless-N models.
 
 
 
 WRT160N Features
 General
 Availability: currently available
 Street price: $59
 Warranty: 1 year(s)
 LAN / WAN Connectivity
 WAN ports: 1
 WAN port(s) type: 10/100 Base-TX (RJ-45)
 WAN port auto cross-over: yes
 LAN ports: 4
 LAN ports type: 10/100 Base-TX (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 DMZ: yes
 Port forwarding: yes
 Port forwarding of ranges: yes
 Port triggering: yes
 DHCP server: yes
 DHCP client: yes
 Dynamic DNS client: yes
 QoS: yes
 UPnP: yes
 MAC Address clone: yes
 MTU configurable (WAN): yes
 MTU limit (WAN): 1500
 DSL
 PPPoE client: yes
 Wireless
 Maximum Wireless Speed: 150 Mbps
 WiFi standards supported: 802.11b (11 Mbps)
802.11g (54 Mbps)
802.11n (draft)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
RADIUS authentication
Wireless MAC Address filtering
 WiFi modes: Access point
 internal antenna(s): 2
 Default SSID: linksys
 WMM (QoS): yes
 WPS (Wi-Fi Protected Setup): yes
 Dual Band (2.4GHz/5GHz): no
 VPN
  IPSec
 IPSec passthrough: yes
  L2TP
 L2TP passthrough: yes
  PPTP
 PPTP passthrough: yes
 Firewall
 SPI firewall: yes
 Filtering: Domain/URL blocking, MAC Address filtering, Proxy, Java, ActiveX, Cookie
 Device Management
 Default IP address: 192.168.1.1
 Default admin username: (blank)
 Default admin password: admin
 Administration: Web-based (LAN)
Remote configuration (WAN)
Quick Setup Wizard
 Firmware upgradeable: yes
 Event log: yes
 Diagnostic functions: yes
ping, traceroute
 Misc hardware info
 Chipset: Broadcom4716A 300MHz
 RAM: 32 Mb
 Flash Memory: 4 Mb
 Third-party firmware support: yes
DD-WRT
 Notes: v1.0, v.1.1 and v.2.0 have 16 Mb RAM, 4 Mb flash memory.
 Links
 Product page: http://homesupport.cisco.com/en-us/wirel...
 Datasheet: http://homedownloads.cisco.com/downloads...
 Manual: http://homedownloads.cisco.com/downloads...
 Quick Install Guide: http://homedownloads.cisco.com/downloads...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
print discuss top
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About