Shortcuts
|
 |
Linkpro WLG-54HOP
|
| details: | 802.11b/g 54Mbps High Power Wireless PoE AP |
| hardware type: | Wireless Access Point |
| date added: | 2011-01-03 |
| updated: | 2020-03-24 |
WLG-54HOP supports data transmission rates of up to 54Mbps. It supports AP, Client NAT and Router mode. It also provides 128-bit WEP, WPA/ WPA2 wireless encryption and MAC Filtering.
For applications that require users to put a network device (such as an AP) in a location where there is no electrical outlet available, WLG-54HOP also supports Passive Power over Ethernet.
| WLG-54HOP Features |
| General
|
| Availability: |
discontinued
|
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
1 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| NAT routing: |
|
| Multihomed: |
|
| Dynamic DNS client: |
|
| UPnP: |
|
| Wireless
|
| Maximum Wireless Speed: |
54 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
RADIUS authentication
Wireless MAC Address filtering
|
| WiFi modes: |
Access point
|
| external antenna(s): |
1 |
| ext antenna(s) removable ?: |
|
| Antenna connector: |
RP-SMA (Reverse SMA)
|
| Transmit Power: |
+24 dBm |
| Receiver Sensitivity: |
-68 dBm |
| Multiple SSID: |
|
| Device Management
|
| Default IP address: |
10.0.0.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
|
| Firmware upgradeable: |
|
| Misc hardware info
|
| RAM: |
32 Mb |
| Flash Memory: |
8 Mb |
| Power over Ethernet (PoE): |
|
| Links
|
| Product page: |
http://www.linkpro.com.tw/product_wirele... |
| Datasheet: |
http://www.linkpro.com.tw/PDF/WLG-54HOP-... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
