The LAN port can (even parallel to LAN mode) be used as a WAN port for connecting external DSL modems (PPPoE) or external routers.
This access point can be operated in standalone mode and managed with the free administration tools, or it can be centrally managed by a Lancom WLAN controller.
| L-451agn Features | |
| General | |
| Availability: | currently available |
| Warranty: | 3 year(s) |
| LAN / WAN Connectivity | |
| LAN ports: | 1 |
| LAN ports type: | Gigabit Ethernet (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| NAT routing: |
|
| Multihomed: |
|
| Port forwarding: |
|
| DHCP server: |
|
| DHCP client: |
|
| DHCP relay: |
|
| Dynamic DNS client: |
|
| QoS: |
|
| ToS / DiffServ: |
|
| Routing Protocols: |
Spanning Tree Protocol (STP) VLAN tagging (802.1q) IGMP Multicast (RFC 1112) |
| Wireless | |
| Maximum Wireless Speed: | 450 Mbps (Wi-Fi 4) |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11a (Wi-Fi 2) 802.11g (Wi-Fi 3) 802.11n (Wi-Fi 4) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) RADIUS authentication Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Multipoint bridge (PtMP) |
| external antenna(s): | 3 |
| ext antenna(s) removable ?: |
|
| Antenna connector: | RP-SMA (Reverse SMA) |
| Antenna gain: | 3 dBi |
| Transmit Power: | +18 dBm |
| Receiver Sensitivity: | -80 dBm |
| Multiple SSID: |
|
| WMM (QoS): |
|
| WMM-PS (QoS): |
|
| Dual Band (2.4GHz/5GHz): |
|
| Firewall | |
| SPI firewall: |
|
| DoS / DDoS protection: |
|
| Intrusion Detection System (IDS): |
|
| Filtering: | Domain/URL blocking, packet filtering |
| Device Management | |
| Default IP address: | 172.23.56.254 |
| Administration: |
Web-based (LAN) Quick Setup Wizard Telnet / CLI SSH TFTP (RFC 1350) |
| Firmware upgradeable: |
|
| Email alerts: |
|
| Event log: |
|
| Usage Statistics: |
|
| Diagnostic functions: |
ping, traceroute |
| Misc hardware info | |
| SNMP support: | SNMP v.2 |
| IPv6 support: |
|
| NTP client: |
|
| Power over Ethernet (PoE): |
|
| Notes: | The AP features one serial configuration interface / COM port (8 pin Mini-DIN). |
| Links | |
| Product page: | http://www.lancom-systems.de/en/products... |
| Datasheet: | http://www.lancom-systems.de/download/LC... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|