speedguide.net  

Lancom L-320agn

details: Dual Band Wireless-N Access Point
hardware type: Wireless Access Point
date added: 2012-12-13
updated: 2013-04-08
The LANCOM L-320agn is a 802.11n dual band access point with an integrated MIMO antenna which operates either in the 2.4 or 5-GHz band. As this access point features 802.3af Power over Ethernet, it can even be installed if no wall sockets are available.

The 802.11n standard includes several mechanisms such as MIMO, 40 MHz channels, packet aggregation, and block acknowledgement which significantly increase the
amount of bandwidth available for user applications.

A comprehensive range of security technologies is supported in wireless LAN including IEEE 802.11i, 802.1X, WPA, WPA2, WEP64/128/152, access control lists or LEPS (LANCOM Enhanced Passphrase Security), which enables the configuration of an optimized solution, whatever the individual requirements. Multiple SSID allows the definition of up to 8 user groups, each with its own level of security.

The LAN port can (even parallel to LAN mode) be used as a WAN port for connecting external DSL modems (PPPoE) or external routers.
 
 
 
 L-320agn Features
 General
 Availability: currently available
 Warranty: 3 year(s)
 LAN / WAN Connectivity
 LAN ports: 1
 LAN ports type: Gigabit Ethernet (RJ-45)
 LAN ports auto cross-over: yes
 Router
 NAT routing: yes
 Multihomed: yes
 Port forwarding: yes
 DHCP server: yes
 DHCP client: yes
 DHCP relay: yes
 Dynamic DNS client: yes
 QoS: yes
 ToS / DiffServ: yes
 Routing Protocols: RIP v1 (static routing, RFC 1058)
RIP v2 (dynamic routing, RFC1389)
Spanning Tree Protocol (STP)
VLAN tagging (802.1q)
IGMP Multicast (RFC 1112)
 Wireless
 Maximum Wireless Speed: 300 Mbps (Wi-Fi 4)
 WiFi standards supported: 802.11b (Wi-Fi 1)
802.11a (Wi-Fi 2)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
 Wifi security/authentication: WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
RADIUS authentication
 WiFi modes: Access point
Wireless client
Wireless bridge (PtP)
 Transmit Power: +17 dBm
 Receiver Sensitivity: -80 dBm
 Multiple SSID: yes
 WMM (QoS): yes
 WMM-PS (QoS): yes
 Dual Band (2.4GHz/5GHz): yes
 Firewall
 SPI firewall: yes
 DoS / DDoS protection: yes
 Intrusion Detection System (IDS): yes
 Filtering: Domain/URL blocking, packet filtering
 Device Management
 Default IP address: 172.23.56.254
 Administration: Web-based (LAN)
Quick Setup Wizard
Telnet / CLI
SSH
TFTP (RFC 1350)
 Firmware upgradeable: yes
 Email alerts: yes
 Event log: yes
 Usage Statistics: yes
 Diagnostic functions: yes
ping, traceroute
 Misc hardware info
 SNMP support: SNMP v.2
 NTP client: yes
 Power over Ethernet (PoE): yes
 Notes: This AP features serial configuration interface / COM port (8 pin Mini-DIN)
 Links
 Product page: http://www.lancom-systems.de/en/products...
 Datasheet: http://www.lancom-systems.de/download/pr...
 Manual: ftp://ftp.lancom.de/LANCOM-Releases/LC-L...

Please use the Add Comment function below to review devices you have used (please be descriptive). If you find an error in our database, or have additional information about the product, please
  Post your review/comments
    rate:
   avg:
News Glossary of Terms FAQs Polls Cool Links SpeedGuide Teams SG Premium Services SG Gear Store
Registry Tweaks Broadband Tools Downloads/Patches Broadband Hardware SG Ports Database Security Default Passwords User Stories
Broadband Routers Wireless Firewalls / VPNs Software Hardware User Reviews
Broadband Security Editorials General User Articles Quick Reference
Broadband Forums General Discussions
Advertising Awards Link to us Server Statistics Helping SG About