Shortcuts
|
 |
JCG JWA-N2100
|
| details: | Wireless-N Access Point |
| hardware type: | Wireless Access Point |
| date added: | 2011-01-16 |
| updated: | 2013-04-11 |
The JCG JWA-N2100 Wireless-N Access Point allows for easy and secure wireless network configuration.
This access point provides multiple protection features. It can be set to turn off wireless network name (SSID) broadcast so that only stations that have the SSID can be connected. The AP provides wireless LAN 64/128-bit WEP and WPA/ WPA2 wireless encryption.
Featuring high transmission rates, simple installation and adaptability, the JCG Wireless-N Access Point is a good solution for small office and home needs. The AP provides AP/AP Client/Repeater/WISP modes and complies with IEEE 802.11n/g/b standards.
| JWA-N2100 Features |
| General
|
| Availability: |
currently available
|
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
1 |
| LAN ports type: |
Gigabit Ethernet (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| DHCP client: |
|
| Wireless
|
| Maximum Wireless Speed: |
300 Mbps (Wi-Fi 4)
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
802.11n (Wi-Fi 4)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
Wireless client
Repeater mode
WISP mode
|
| internal antenna(s): |
1 |
| Antenna gain: |
2 dBi |
| Transmit Power: |
+15 dBm |
| Receiver Sensitivity: |
-65 dBm |
| Device Management
|
| Administration: |
Web-based (LAN)
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Links
|
| Product page: |
http://www.jcg.com.cn/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
