The UGL2454-APK provides WDS bridging function, allowing users to connect two or more Access Points together. It also provides transparent bridging and roaming capabilities for wireless nodes.
This device can be installed by the simple setup wizard provided as a part of the web management utility.
| UGL2454-APK Features | |
| General | |
| Availability: | discontinued |
| LAN / WAN Connectivity | |
| WAN ports: |
0 |
| LAN ports: | 1 |
| LAN ports type: | 10/100 Base-TX (RJ-45) |
| LAN ports auto cross-over: |
 |
| Router | |
| DHCP server: |
|
| DHCP client: |
|
| Wireless | |
| Maximum Wireless Speed: | 54 Mbps |
| WiFi standards supported: |
802.11b (Wi-Fi 1) 802.11g (Wi-Fi 3) |
| Wifi security/authentication: |
WEP WPA (TKIP) WPA2 (AES) 802.1X (EAP-MD5/TLS/TTLS/PEAP) Wireless MAC Address filtering SSID Broadcast disable |
| WiFi modes: |
Access point Wireless client Wireless bridge (PtP) Repeater mode |
| external antenna(s): | 1 |
| ext antenna(s) removable ?: |
|
| Antenna connector: | RP-SMA (Reverse SMA) |
| Antenna gain: | 2 dBi |
| Transmit Power: | +18 dBm |
| Receiver Sensitivity: | -68 dBm |
| WDS compatible: |
|
| Device Management | |
| Default IP address: | 192.168.1.1 |
| Default admin username: | admin |
| Default admin password: | admin |
| Administration: |
Web-based (LAN) Quick Setup Wizard |
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Usage Statistics: |
|
| Misc hardware info | |
| RAM: | 8 Mb |
| Flash Memory: | 2 Mb |
| Links | |
| Product page: | http://www.eusso.com/Models/Wireless/UGL... |
| Datasheet: | http://www.eusso.com/Download/Datasheet/... |
| Manual: | http://www.eusso.com/Download/Manual/Wir... |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
Post your review/comments
rate:
avg:
|
|
|